99Z28RS

Wondering if anyone has these guauges, how do you like them and how they look??

99Z28RS

n e one?

blown 346

iTrader: (25)

I have them on my 2000 and I like them alot. It's cool that you have an option between either 2 or 5 colors and you can also change the brightness of them.

Honez

I love mine! <img border="0" alt="[driving]" title="" src="graemlins/gr_driving3.gif" />


http://www.redlinezone.com/indiglow_chevy.htm

TimsWS6

will these gauges fit my 2002 WS6...looks like they will

redsscamaroboy

iTrader: (7)

Honez,thanks for posting that link. I just bought them for my car thanks to you! SWEET SET UP. <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />

99Z28RS

Anyone have any of the plain ones?

1BAD-SS

HONEZ:

Did you put those gauges in yourself or did you have someone install them for you? If you did it yourself how hard was the install? Can you get them without the logo, just plain gauges? <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />

Fbody Man

it is real hard especially wen u have to put the needles back in
<img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" />

Fbody Man

as a matter of fact can any body tell me where i could take my car and have the gauge cluster fixed? (my needles r a little bit off i want the needles put in right)

steele

iTrader: (11)

Here are those gauges in my T/A. They're the ones for the 98+ Camaro, although I had to cut and modify them to look like this:

<img src="http://***-internet.com/steele/gauges/new-gauges.jpg" alt=" - " />

<img src="http://***-internet.com/steele/gauges/new-gauges-night.JPG" alt=" - " />

Fbody Man

ne1 please it bothers the **** out of me i need them <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" /> done <img border="0" alt="[bang head]" title="" src="graemlins/gr_banghead.gif" />

MONGOOS

dealership...

Fbody Man

all they'll wanna do is sell me a whole new cluster

steele

iTrader: (11)

FBody Man: Your needles should reset themselves automatically. Unless you took them completely off which there's no need to do with gauge overlays. <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />

Xsta Z 28

iTrader: (2)

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by steele:
<strong> FBody Man: Your needles should reset themselves automatically. Unless you took them completely off which there's no need to do with gauge overlays. <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Depends on what over lay you get. Some require the removal of the needles to install the face, since you ahve to remove the old one. Just FYI.

As for resetting the needles. find s freind with autotap. You should be good from there.

Honez

Ok guys, to start with you should never, never remove those needles. You will never get them back on. God help you if you removed them, the thing will never be the same. These gauges will just slip over them. To install these you will need to take the cluster out of the dash. It's very easy to do. I have done several of these and I can now get one out in about 10 to 15 minutes. You need to drop the lower panel under the steering wheel, remove the little plastic cap on the tilt lever, then take a short screw driver and remove the black plastic bezel, then a long thin flat head screw driver and remove the clear plastic cover from the cluster. It just snaps on by 4 little tabs. Be careful, your trip reset button will now just pop out in your hand so don't lose it and the spring. Then all you have to do is remove the 4 screws that hold the cluster in. Once you have those out, then gently tilt it out. You may have to apply downward pressure to the steering wheel to get the cluster out. Once out gently slip the Indiglow gauges over each needle and into place, (NOTE) Line up all the needels to the same postion and do them all at once. There is also a little black stop for the Tach, take it out and don't lose it, you will need to reinstall it after the Indiglows are on. Another (NOTE)! There is no adhesive on the Indiglows and I found that they can slightly raise around the Tach or Speed needle interfearing with them. I used a double stick 3m film around just those two holes to keep them from rising and interfearing with my needles. Since I have done that it has been perfect since. The 3m stuff comes in a roll and I'm sorry but I'm not sure where you can get it, but you must use it or something like it or you will be doing this twice like I did. The big thing on doing this is:

1. Don't remove your needles.
2. Take your time and don't loose any of the pieces you take off.

<img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />

Fbody Man

i had to take off the old face and needles to put on the new face. <img border="0" alt="[bang head]" title="" src="graemlins/gr_banghead.gif" /> The new face had adhesive on it. How exactly does auto tap reset those needles cause i could get it if i need it.
Besides everything is pretty good except for the tach and temp gauge being a little off and it annoys me.

Sniper33

HONEZ : Would those gauges fit in a 2002 Z28??

Hershey Squirt

iTrader: (6)

Will these fit a '01 TA? Do they actually say Red line or whatever on them? Can you call them or something to find out? Went to the site and no contact info.