Constrictor 98TA

I posted this on the other board, but just in case some of you havent seen it. I took the time to write up an LED tutorial on how to add LED accent lights anywhere in your car. I chose to replace the dim lights in the inner door right above the handle that illuminate the switches with briter red LEDs. I think it looks awesome in person. Here is a picture, and the tutorial on how its done.

http://www.metalreviewcentre.com/LED.htm

Steve1969LS1

iTrader: (1)

Thanks for the link.. so we will be seeing more of you now??

2KThunder

iTrader: (4)

Nice write up

Deech

iTrader: (8)

Cool, I might have to try that out! Thanks!!

BAD ASS TA WS6

iTrader: (5)

Sweet dude, my driver's side door panel light is out anyways. SO this is the way to go...now I don't have to figure anything out.

Rob

solobaric

iTrader: (5)

Very nice!

onyxxtreme

iTrader: (4)

if you guys wanna have fun, dont use resistors

Constrictor 98TA

Thanks for the compliments everyone, and yeah, I'll be spending a LOT more time over here!

Steve, have you been getting my PMs?

willis 00

great write up! gotta love leds.

DaddySS

Excellent write up, thanks for taking the time.

cueball

i did that to my 99 camaro 4 years ago and i did a lot more after every body seen it and thought was cool, i also did it on a lot of other cars (Z71 trucks, eclipses, supras, ect...)
also built led light bars that go under the car instead of neon tubes,brighter
more clear of a color, and lastes longer
they realy change the looks for the better
good luck in moding its a lot of fun

trbochv6

Hey, where did the link go??

Blackbirdws6

iTrader: (7)

same here, link isnt working for me

Slammed-am

Please fix the link or someone send me the write up please. I'm very interested.

2KThunder

iTrader: (4)

Guys, The link was active....in 2004. Ive noticed lots of good tutorials gone down due to hosting...