Here is the shaved &blacked out tail panel!
#1
TECH Fanatic
Thread Starter
Join Date: Oct 2002
Location: F.H,Waterford,Port Huron, MI
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
Here is the shaved &blacked out tail panel!
I didn't realy like the CAMARO on the tail panel go I shaved it and had the panel painted at the same time. Let me know what you think!
http://community.webshots.com/photo/...36872014slRByJ
http://community.webshots.com/photo/...36872014slRByJ
#2
TECH Senior Member
iTrader: (4)
Originally Posted by 2FAST4U
I didn't realy like the CAMARO on the tail panel go I shaved it and had the panel painted at the same time. Let me know what you think!
http://community.webshots.com/photo/...36872014slRByJ
http://community.webshots.com/photo/...36872014slRByJ
#4
TECH Fanatic
Thread Starter
Join Date: Oct 2002
Location: F.H,Waterford,Port Huron, MI
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
The TT setup (INCON) with the samer turbos/stock motor 520hp and 593tq. New setup is built motor bigger turbos and the 2 stage NOS so we are maxing the MAF at 600rwhp then spraying 100hp wet (than is both stages at once)I it's done as you can see up easy to say 750rwhp and 8**tq.
Need a DFI but cost vs gain and what am I to do with 700hp on a nitto on the street anyways?
Need a DFI but cost vs gain and what am I to do with 700hp on a nitto on the street anyways?
Trending Topics
#14
TECH Fanatic
Thread Starter
Join Date: Oct 2002
Location: F.H,Waterford,Port Huron, MI
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BrostalSS
looks good, but if you still can, shave off the trunk keyhole as well. that will give it an evne better look.