Finally painted hood and new rims on my TA
05-02-2013, 05:08 PM
#1
Finally painted hood and new rims on my TA well after 2.5 years with the black fiberglass hood from VFN I finally got it painted to match.
I got sick of the WS6 speedlines with 275's on all fours so i picked up a set of ZR1's. Its really not what i wanted but got them at a killer deal with 315 Nitto555r's on the rear ..I needed 315's out back so i couldnt pass it up.
The Zr's are a slight change cause they are OE rims and somewhat look like the Speedlines but im happy for now.
whatcha think?
from this:
to this:
I got sick of the WS6 speedlines with 275's on all fours so i picked up a set of ZR1's. Its really not what i wanted but got them at a killer deal with 315 Nitto555r's on the rear ..I needed 315's out back so i couldnt pass it up.
The Zr's are a slight change cause they are OE rims and somewhat look like the Speedlines but im happy for now.
whatcha think?
from this:
to this:
Trending Topics
05-03-2013, 07:32 AM
#10
17-11's rear with 315/35/17
17-9.5's front with 275/40/17
the before picture I had 1" wheel spacers on the rear.
the after picture I took them off and the rims sit perfectly flush with the quarter panels. Maybe about 3/8th inside the well which is perfect!
also, the front 9.5's are a tad wider than the stock speedlines so the tire is a little wider in the front
Last edited by stroked383HSR; 05-03-2013 at 08:48 AM.
you bastard!!
05-03-2013, 12:44 PM
#16
I hope it works right for you. I will be adding a plate kit here shortly, but I'm not looking forward to all that wiring. I saw those pics you had and it looks like a pretty daunting task. Good luck.
05-03-2013, 12:53 PM
#17
TECH Fanatic
I liked the Speedline wheels but the hood looks much better.
