*KANDY SS*

title is pretty clear. I can't get them out for the life of me. I already nicked up the paint some (you can't see it, behind the light) but it pisses me off. Is there any f'in way you can get them out this way!!!!!!????/ f'in GM people are idiots...the foam is in the way on the one side and the side of the body is in the way on the other side. I'm about to break these things or something in half.

jmurray87

iTrader: (1)

Yes....take the headlights out, reach down, and remove....ur done.


(guessing ur camaro is a 98+)

mcmillion

iTrader: (5)

Did you take the headlights out? Assuming you have a Camaro, that's the easiest way.

Roadhouse

iTrader: (8)

Pull the headlights out and you'll have alot of room to remove the corners.

MikeSomething

iTrader: (11)

Oh yea, incase you haven't read the few posts above this, PULL THE HEADLIGHTS OUT. Badda-BiNG, Badda-BooM!

*KANDY SS*

how the hell do you get the headlights out. I seem to have all the bolts out but it doesnt want to come out? Do I just yank on it? lol...sorry for the chip in my shoulder. but im seriously going crazy now. These are my third pair!

mcmillion

iTrader: (5)

Sorry for the repeat I think we all posted at the same time

edwardswb

iTrader: (6)

I don't have any inner fenders/plastic crap or front bumper support, I crawled underneath and swapped em in about 5 minutes. lol

mcmillion

iTrader: (5)

Pull ot the bulbs, there is one nut that holds them on the bracket, then slide towards the middle.

99Z28vert

iTrader: (1)

Once you have the bolt out, slide them to the side. There's a tab on the back of the headlight that is holding it into the back panel there.

02silvaZ

iTrader: (12)

go thru dropdown panel for fog lights, thats what i did

Camaro Ryder KV

iTrader: (12)

1 bolt ubolts then headlights, push in and slide torwards the center of the car and ur good

Datzneat

iTrader: (4)

+1 on removing the headlights. I was in your position two days ago...goin crazy. Once I got the headlights out it was alot easier. Still had to force them a little because of the foam. Post pics when done!

6LITEREATER

iTrader: (56)

Update?

Mistacamawo

Swapping corners is no fun.

Red 01SS

iTrader: (2)

Just did mine, the headlights were removed and I still had to cut away some of the foam support.

...more time consuming than anything

Cld069

iTrader: (2)

I never had to remove my headlights. Granted it took me some time the first time to get it, but everytime after that I could get the lens in and out in about 10 min. Just took me a little fanagling.

*KANDY SS*

thanks for all the replies. Well, I have bigger problems now. The one clear is in on the passenger side, but the drivers bolt (holding the headlight into place) is stripped! On top of that, my fog lights don't want to turn on for anything.

Camaro Ryder KV

iTrader: (12)

drill out the screw, replace the bulbs, dont sweat it