Steve P

iTrader: (6)

Order any of our Tropi-Care microfiber towels or the new Lake Country "Ulti-Mit" foam wash mitt now through October 18 and we'll ship to you for free. Save at least $5.95 or more.

Choose any of the following: (Pictures/descriptions at www.tropi-care.com)

TC-M1 Lake Country "Ulti-Mit" List $17.99 Ours $14.99
TC-F1 Blue oval polish applicator $2.19
TC-M2 Microfiber Wash Mitt $6.99
TC-M3 Waffle Weave drying towel List $16.99 Ours $12.49
TC-M4 "Super Plush" polishing towel $6.99
TC-M5 Gray plush detail towel $3.99
TC-M7 Gray microfiber polishing bonnets $5.99/pair
TC-W9 Woven glass cleaning towels $2.99 each 2 or more $2.49 each
TDA-1 Lake Country 4" round foam tire dress applicator $1.99

Contact us at toll-free (866)341-0050 for questions or volume discounts on 12 or more of any single item.

May not be combined with any other products. PayPal orders to steve@tropi-care.com. We'll refund your shipping charges. For online orders at www.tropi-care.com, we'll deduct the cost of shipping from your order during payment processing. 8.25% sales tax added to TX orders.

ArcticZ28

iTrader: (14)

Throw in some TC-8 and I might be interested

brianfromhawaii

iTrader: (3)

your link for the porter cable doesnt work.

ArcticZ28

iTrader: (14)

What's the difference in the white or grey MF polishing bonnets?

Steve P

iTrader: (6)

Which link are you referring to? We'll check it out.

Steve P

iTrader: (6)

The white bonnets were our previous variety. They are now replaced by the same style and weave from the manufacturer. The current bonnets are now gray. Sells for $5.99/pair and both sides can be used for removal.

ArcticZ28

iTrader: (14)

Gotcha.

TheSilverOne

iTrader: (22)

just made an order. THANKS!!!

pwterz28

iTrader: (10)

i want to be able to apply product like the swirl remover and then polish and wax with my porter so which pads do i need great products thanks

Steve P

iTrader: (6)

For example using Tropi-Care products, you can use the orange "cutting/polishing" pad with the TC-8 Swirl Cutter. The key is to move across the surface at the rate of 1"/second while breaking down the product until it's almost clear. Set your speed dial at 5 (Increase or decrease as necessary) and monitor the conditions of the surfaces. Lightly mist the work area with a spray bottle of water to minimize dusting and reduce the chance of micro-marring. Inspect the results. The finer scratches will be removed first followed by the deeper ones. Some scratches may be too harsh for the Swirl Cutter to remove. The use of yellow "medium cutting" pad may be necessary for removal.

A white light polishing pad can be used to further refine and smooth the surface. Once satisfied with the finish, you can apply last step products such as sealant, liquid waxes or glazes with the black or blue finishing pads.

pwterz28

iTrader: (10)

i plan on using tropi care products but if i dont have alot of experience am i better off doing it by hand i see some of your pads says to use with experience i just dont want to burn the paint or make it worse thanks