school me on TCs
#1
school me on TCs
current mods are on my sig... not my dd but i want to keep it with a good drivavility.
future mods: pulley,cam, fast intake
looking to get any where in between 400-450 hp when everything is said and done.
dont really know much about tc's so im looking for some insight.... and what are the price ranges....
future mods: pulley,cam, fast intake
looking to get any where in between 400-450 hp when everything is said and done.
dont really know much about tc's so im looking for some insight.... and what are the price ranges....
#3
11 Second Club
iTrader: (13)
Join Date: Jan 2006
Location: Bourbonnais, IL
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
tc i believe is one of the best mod you can do for an auto car. a 3600 is usually regarded as a good drivability converter. prices can range from 500 to 1200+ new. and u get what you pay for with converters too.
#6
TECH Fanatic
iTrader: (6)
Join Date: May 2004
Location: Katy, Texas
Posts: 1,381
Likes: 0
Received 0 Likes
on
0 Posts
I see your in Texas, not sure which town. I would check out Circle D in Houston. They make very high quality converters and each are custom made for your car from billet steel.
I went with their multidisk 4C converter. It was $925 but its money well spent for a quality converter with a good lock up clutch.
I went with their multidisk 4C converter. It was $925 but its money well spent for a quality converter with a good lock up clutch.
Last edited by JScamaro; 10-14-2008 at 05:55 PM.
#7
LS1Tech Sponsor
iTrader: (3)
Hey Greg from FTI Competition Converters here. I would recomend a SRLS0391 wich is a 3600 converter with great drivabilty. This converter will drive like a 2500 but give you the performance you are looking for. The converter is fully furnace brazed,billet lock-up piston,billet front cover,chrome moly impeller hub,5140 turbine splines,tig welded,computer balanced,and run out tested. Our converters come with a three year waranty and have a free stall change.These converters are on sale this month for LS1 Tech users at 675.00 with free freight @ t-shirt to the continental 48 states.Just give me a call if I can help toll free at 1-866-726-8358.
Thanks,
Greg
FTI Competition converters
Thanks,
Greg
FTI Competition converters
__________________
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
Trending Topics
#10
so you think the vig 3200 (3600) will be too big???
i do plan on doing cam, pulley, down the road....
my other question is should i have it installed once i do get it..or wait till i have everything (cam ect.) to have it installed all at once and only worry about having it tuned once.
i do plan on doing cam, pulley, down the road....
my other question is should i have it installed once i do get it..or wait till i have everything (cam ect.) to have it installed all at once and only worry about having it tuned once.
#12
10 Second Club
iTrader: (3)
The bigger the better. I went with a Hayden from Pep boys that is rated for a 32,000 GVW RV. Its big but my trans temps have never been over 180 even in 95+ degree weather while racing it at the track. I would remove the radiator from the loop when you install the tranny cooler too. Make it so the fluid comes out of the trans and goes right to the cooler and then back to the trans.
#13
LS1Tech Sponsor
iTrader: (3)
z 28 n tx.
The converter I recomended SRLS0391 is a street converter that drives very well for a DD.Most people see 6-8 tenth gains with this converter over stock.Give me a call toll free at 1-866-726-8358 and i can explain this to you.We also have trans coolers in stock as well!!!
Thanks,
Greg
The converter I recomended SRLS0391 is a street converter that drives very well for a DD.Most people see 6-8 tenth gains with this converter over stock.Give me a call toll free at 1-866-726-8358 and i can explain this to you.We also have trans coolers in stock as well!!!
Thanks,
Greg
__________________
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
#15
FormerVendor
iTrader: (21)
current mods are on my sig... not my dd but i want to keep it with a good drivavility.
future mods: pulley,cam, fast intake
looking to get any where in between 400-450 hp when everything is said and done.
dont really know much about tc's so im looking for some insight.... and what are the price ranges....
future mods: pulley,cam, fast intake
looking to get any where in between 400-450 hp when everything is said and done.
dont really know much about tc's so im looking for some insight.... and what are the price ranges....
I can show you all the options and what you will need.
I might have my CNC running, it is very cool to watch!!
Chris
#16
TECH Enthusiast
iTrader: (1)
Join Date: Dec 2006
Location: Shelbyville, IN
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
I have a Yank SS3600 and love it. Although, most of the sponsors here are very reputable. That FTI converter with the sale, free stall, and 3yr warranty does look awful nice...
#17
LS1Tech Sponsor
iTrader: (3)
See what our customers say !!!!.
https://ls1tech.com/forums/automatic-transmission/990265-new-sponsor-ls1-tech-fti-competition-converters.html
I would love to help.These converters will be on sale till oct 31.
Thanks,
Greg
FTI Competition Converters
https://ls1tech.com/forums/automatic-transmission/990265-new-sponsor-ls1-tech-fti-competition-converters.html
I would love to help.These converters will be on sale till oct 31.
Thanks,
Greg
FTI Competition Converters
__________________
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet