SIKHS 5

I have a 4L80E(year 2002) and i was looking for an adapter for my tranny cooler. basically im looking on threading the adpater in and having a hose barb end so i could hook up my tranny cooler. ive looked around everywhere but i just cant seem too find it. links/part numbers would be great.

thank you

SIKHS 5

maybe something like this? the angle doesn't matter even though a 90 would nice

FirstYrLS1Z

iTrader: (4)

to OP,threading an adaptor into trans case or into radiator ?

SIKHS 5

into the trans case, so i can hook up some transmission oil hoses to a tranny cooler.

SIKHS 5

the only thing i can think of

purchase this 4l80e to -6AN:



then buy this -6an to 3/8" barb adaper

slow67

iTrader: (2)

You can use 1/4 NPT if you don't he-man the fitting into the case.

SIKHS 5

thats what i was thinking but dont you "have to" use only tube fittings in the rear port of the 4L80e?

MIGHTYMOUSE

iTrader: (59)

i made my own just like your first picture but went to -an for braided line

http://www.streetfire.net/photo/0618...pg_1721326.htm

on the newer trans with the split ports yea you need to run the fitting with the extension

Cam72aro

iTrader: (28)

Why not do them with an fittings and push lock hose. I know braided is expensive, but push lock will work great and somewhat cheap. With barb fitting they seem to always leak and I wouldn't want a tranny fluid leak and it getting on the tires at the track or anywhere else.

RARON455

iTrader: (35)

I also used -an adaptor fittings and ran braided hose.

slow67

iTrader: (2)

yes, you can make one from an AN fitting. Vince did it in the past.

I've heard (from more than 1 person) that the pressure/temps can blow them off. I'd either do hardline or braided.

Cam72aro

iTrader: (28)

I have braided on mine. How much pressure is running through the cooler lines?

slow67

iTrader: (2)

Its not so much the pressure, its more the temps. you can easily see 300+ degrees coming out of the converter while on the transbrake.

Cam72aro

iTrader: (28)

I could see that. Makes sense.