guys with cam and stall?
#1
TECH Addict
Thread Starter
iTrader: (13)
Join Date: Sep 2004
Location: arlington aka aggtown
Posts: 2,677
Likes: 0
Received 0 Likes
on
0 Posts
guys with cam and stall?
HEy guys do yall usually lose to a m6 with a cam i was just wondering since my car is a a4 ? And if so how bad do u guys get beat? ALso what gear do yall go form like a 40 punch?
#4
11 Second Club
Originally Posted by gator's 99TA
1) autos dont run from a 40 roll. rolls are for dinner, not racing
2) i have only lost to a few 6 speeds ever from a dig with similar power. i have raced a ton.
3) even the 6 speed guys will admit a cammed big stall auto will crush them.
2) i have only lost to a few 6 speeds ever from a dig with similar power. i have raced a ton.
3) even the 6 speed guys will admit a cammed big stall auto will crush them.
Stalled autos are the way to go for drag racing.
Not to say the M6's can't do it well, but it's easier, cheaper and more consistent with an auto.
#7
10 Second Club
iTrader: (4)
Join Date: Feb 2003
Location: Melvin ,KY
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
from a roll the m6 will own a auto...But at the track, a stalled a-4 with say a 3500 stall isn't going to be faster than an m6 with a 12 bolt that can launch a 5,000+ rpms....... If the m6 can 60 ft similar to the stalled a-4 the m6 will run faster with a driver....
Trending Topics
#8
10 Second Club
iTrader: (63)
Originally Posted by blkZ28spt
Stalled autos are the way to go for drag racing.
Not to say the M6's can't do it well, but it's easier, cheaper and more consistent with an auto.
An M6 to me is more fun on the street. Hell, it usually fun to run at the track too, but launching can be a pain. An auto car with a stall will kick some *** on the track, even if it's not that impressive on a dyno. That is really the way to go.
Which would you rather be good at? The track or the dyno? I'd rather kick *** at the track and let the posers bench race their dyno queens.
#9
11 Second Club
Originally Posted by Billnz28
from a roll the m6 will own a auto...But at the track, a stalled a-4 with say a 3500 stall isn't going to be faster than an m6 with a 12 bolt that can launch a 5,000+ rpms....... If the m6 can 60 ft similar to the stalled a-4 the m6 will run faster with a driver....