4l80e pricing
#1
TECH Enthusiast
Thread Starter
iTrader: (22)
Join Date: Aug 2003
Location: Kansas
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
4l80e pricing
Okay a local shop can get me one for $2200 built
crossmember $200
speartech wiring $$$????
Yank py3600 $700 for the 80e application
And then paying the tuner to tune for the new transmission.
Am I missing anything? How much is the speartech wiring? I'm going to be pushing 500rwhp n/a and 700rwhp nitrous. I think this is the right route for me.....
crossmember $200
speartech wiring $$$????
Yank py3600 $700 for the 80e application
And then paying the tuner to tune for the new transmission.
Am I missing anything? How much is the speartech wiring? I'm going to be pushing 500rwhp n/a and 700rwhp nitrous. I think this is the right route for me.....
#4
TECH Fanatic
iTrader: (1)
Join Date: Nov 2002
Location: Venice, Ca
Posts: 1,829
Likes: 0
Received 0 Likes
on
0 Posts
You also need a drive shaft, custom cooler lines, and a modify your bin file with 4l80e software. May also want to do a tci flexplate for the nitrous. You will also need a dip stick. Speartech wiring is 165. If someone has everyting in a package may be a lot easier. Still will have to bang in the tunnel to clearance for the main electrical plug.
#6
9 Second Club
iTrader: (37)
you can use the stock driveshaft...get a longer yoke and whack it....you can use the 4l60 dipstick IF you have some patience and can bend it just right but it HAS to go in before the tranny. You can cut/bend your cooling lines and use some rubber hose. All this is the cheap way to do it but it works
Trending Topics
#9
Originally Posted by UL LOSE
Does anybody know how much it would cost to have a shop do the swap? I dont any shops around here that can do it. So anybody know just the normal installation price?