greinder03

iTrader: (11)

i am looking for a converter for my car. has ported heads and ms4 cam. i plan to spray maybe 100-150, but want my converter to perform best on motor. what size stall would you recommend?

eric01ss

iTrader: (13)

go with yank pt4000

greinder03

iTrader: (11)

i thought you werent suppose to use the pt with nitrous, i was going to buy an ss4000

99Hawk262

iTrader: (19)

I would use the SS4000. You can supposedly spray the PT4000, but the result isn't as good as the SS4000.

02 BLK WS6

iTrader: (11)

Vig 3600 should be loose enough on motor and tight enough for spray.

greinder03

iTrader: (11)

so anything between 3600-4200 would be good

c0ncEpT

iTrader: (4)

Another for Yank SS4000.

99Hawk262

iTrader: (19)

Bigger cams seems to work well with bigger converters. I had the SS4000 with my cam but upgraded when my tranny fried to the PT4400 because I don't plan to spray. Needless to say, I like the 4400 a lot more than the 4000. I gained a lot in performance too.

GregWS6&z28

iTrader: (8)

custom ss3800

chevyls1

iTrader: (29)

i have a vig 3800 no spray tho but it was a good stall with the ms4. for street and strip

chevyls1

iTrader: (29)

also looking to get rid of it. going with a th400 trans converter useless to me.

greinder03

iTrader: (11)

how did you like that converter. rip pretty good with that cam

chevyls1

iTrader: (29)

it liked the converter alot. good with that cam. not too aggeresive for the street. did not get too much time with it

bmxer8699

iTrader: (16)

ss4000 all the way

Holocaust

i have a ms4 with a (3800/1.7str) fuddle stall it werk prity dam good

Holocaust

i have a ms4 with a (3800/1.7str) fuddle stall it werk prity dam good