Dusty Southers

iTrader: (1)

Anyone have any ideas on how to remove the rest of my axle out of my diff without pulling the other side out and pushing it through?

Jeremy@RPMTransmissions

iTrader: (12)

Weld a bolt to the broken piece and use a slide hammer to yank it out.

rjoffe

Sounds like you have done that once or twice before !

gtistile

Do another burnout! Maybe it will shoot out on its own!!!

Jeremy@RPMTransmissions

iTrader: (12)

Sure have lol

Fweasel

iTrader: (6)

This.

4doortypels

iTrader: (39)

Maybe pliers...like size big... same thing happened to me... power shifted 2-3 with a heavy spec twin disc... would be good time to drain the diff and do a diff bushing... not sure how much meat is there to grab...

black_ax

Removed the other axle, Put a screw driver in the diff in from the other side and hit the broken axle stub out. Or you can removed the carrier from the case and get it out that way.

punishmentcycle

iTrader: (6)

Other axle comes out and a flat head. Don't bother tryi g anything else

4doortypels

iTrader: (39)

Im gonna say he was trying to avoid pulling the diff

Dusty Southers

iTrader: (1)

Well guys after messin with this thing for 2 hours last night i decided to pull the other side...now getting a screw driver in there is nearly imposable spent another hour trying to hit it with a screw driver from the other side and that thing isnt moving...guess im gonna pull the diff!

Becker

iTrader: (4)

Damn that blows.im constantly beating on my car daily and always questioning how far I can push it. My car feels kind of slow though

Dusty Southers

iTrader: (1)

Yep, two broken axles in 3 weeks...time to spend some money and get an 8.8!!!