Is the V Wagon the perfect AWD LS candidate?
#1
Teching In
Thread Starter
Join Date: Feb 2010
Location: Austin, TX
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Is the V Wagon the perfect AWD LS candidate?
Okay hear me out for a second here...
I have been doing some research here and there is a huge desire for someone to offer an AWD, manual, LS-powered vehicle. I mean visit any vehicle forum and you'll find someone trying to attempt a build with this combination (SRT's included). It's the holy trifecta that has yet to really be executed without huge custom fabrication work.
After digging around a little I have found examples of a t-56 mated to AWD vehicles through a BW 4472 transfer case. Here is a wonderful example...
http://www.speedhunters.com/2012/10/...clone-feature/
And we have seen AWD LS-powered setups in the form of the Trailblazer SS and Saab 9-7 Aero but those options remove the availability of a clutch pedal. I have also thought about the idea of converting a first gen AWD SRX to LS/6spd format since it's built on the same Sigma platform.
Sorry if this is an old topic but this is something I am really interested in. I formerly owned a 1st gen V and I want to get back in the LS-powered/manual world but I live in a snowy climate so AWD is a must.
The question: Could you take a CTS-V (wagon form preferred) and add AWD (through means of a BW 4472 or something similar) with components from a parted-out AWD CTS?
I would love to hear thoughts on this!
I have been doing some research here and there is a huge desire for someone to offer an AWD, manual, LS-powered vehicle. I mean visit any vehicle forum and you'll find someone trying to attempt a build with this combination (SRT's included). It's the holy trifecta that has yet to really be executed without huge custom fabrication work.
After digging around a little I have found examples of a t-56 mated to AWD vehicles through a BW 4472 transfer case. Here is a wonderful example...
http://www.speedhunters.com/2012/10/...clone-feature/
And we have seen AWD LS-powered setups in the form of the Trailblazer SS and Saab 9-7 Aero but those options remove the availability of a clutch pedal. I have also thought about the idea of converting a first gen AWD SRX to LS/6spd format since it's built on the same Sigma platform.
Sorry if this is an old topic but this is something I am really interested in. I formerly owned a 1st gen V and I want to get back in the LS-powered/manual world but I live in a snowy climate so AWD is a must.
The question: Could you take a CTS-V (wagon form preferred) and add AWD (through means of a BW 4472 or something similar) with components from a parted-out AWD CTS?
I would love to hear thoughts on this!
#4
TECH Junkie
iTrader: (3)
I think you're onto something. The CTS wagon, with an LS (with or without SC) a 6 speed, and AWD would be quite the package. Without the supercharger it could be more reasonable on gas. The LSA motor is a bit of a pig but surely puts out the power.
Most subaru LS conversions are RWD as keeping the AWD is just too cost-prohibitive. I have yet to see anyone attempt it with an LS4 (impala/monte FWD) though.
Most subaru LS conversions are RWD as keeping the AWD is just too cost-prohibitive. I have yet to see anyone attempt it with an LS4 (impala/monte FWD) though.
#5
TECH Regular
iTrader: (4)
If it were me I'd ****** up a $3500 SRX and a crashed up V and start swapin parts. The brakes, wheels, exhaust, engine cradle, etc. I would think all that junk would x-fer over being they're both sigma platform. Even a 5.3/4L60E/4472 would make for one hell of a sleeper grocery getter
#6
TECH Addict
iTrader: (10)
I don't see it. There is no room for any of that noise. The motor is too low, even changing pans to the dry sump I doubt would be enough for any kind of axel to hold any kind of power. And space for a transfer case? Past a long **** t-56? The axel going forward would be insane and need a carrier bearing. I'm not saying it can't be done, but the fab work needed to do this to any platform would be amazing.
You'd be better off building something from scratch like a tube frame, or rear facing rear engine type design. A one off. Would be an animal, no doubt about that.
You'd be better off building something from scratch like a tube frame, or rear facing rear engine type design. A one off. Would be an animal, no doubt about that.
#7
TECH Fanatic
iTrader: (1)
I don't see it. There is no room for any of that noise. The motor is too low, even changing pans to the dry sump I doubt would be enough for any kind of axel to hold any kind of power. And space for a transfer case? Past a long **** t-56? The axel going forward would be insane and need a carrier bearing. I'm not saying it can't be done, but the fab work needed to do this to any platform would be amazing.
You'd be better off building something from scratch like a tube frame, or rear facing rear engine type design. A one off. Would be an animal, no doubt about that.
You'd be better off building something from scratch like a tube frame, or rear facing rear engine type design. A one off. Would be an animal, no doubt about that.
Trending Topics
#8
TECH Junkie
iTrader: (3)
I don't see it. There is no room for any of that noise. The motor is too low, even changing pans to the dry sump I doubt would be enough for any kind of axel to hold any kind of power. And space for a transfer case? Past a long **** t-56? The axel going forward would be insane and need a carrier bearing. I'm not saying it can't be done, but the fab work needed to do this to any platform would be amazing.
You'd be better off building something from scratch like a tube frame, or rear facing rear engine type design. A one off. Would be an animal, no doubt about that.
You'd be better off building something from scratch like a tube frame, or rear facing rear engine type design. A one off. Would be an animal, no doubt about that.