any Vic Jr to super Vic square port comparison yet?
#1
any Vic Jr to super Vic square port comparison yet?
Surely somebody has made some passes comparing these things? I bolted a 2 inch spacer on mine to try on mine tomorrow. Will report. Its not a quality spacer, just a cheapo, but will see how it compares to the 1 inch 4 hole. I want to see some Vic Jr, super Vic before and afters
#4
In for results of spacer. By the way, your car seems like about one of the best performers to be doing to the Super Victor comparison! Although I think ported heads will possibly see the best gains with the intake.
#6
TECH Fanatic
iTrader: (7)
When they tested an LS carb intake with different spacers,
it made such a small difference that they didn't even bother with posting the results.
They did mention that the 4 hole spacer caused the carb to do some funky ****..
it made such a small difference that they didn't even bother with posting the results.
They did mention that the 4 hole spacer caused the carb to do some funky ****..
Last edited by BigEd_72455; 05-17-2014 at 08:48 PM.
Trending Topics
#18
No previous best was 6.34 with 1 inch 4 hole. Put the 2 inch open on it and ran 6.34 off the trailer with a 1.38 60ft. next run ran a 6.30. Last round of time trials. Then, 1st round of eliminations it went 1.351 60ft, i had the guy tree'd, and pedaled on the end, lost 5mph, took the win with a 6.31 on the 6.29 dial. It was definitely on a break out pass. never cut any lights worth a crap the rest of night, went out 3rd round.