bimerok

iTrader: (1)

Hi all,

Can anyone help me determine what this connector on the picture is for? It is only one pin connector and I can't seem to find what's it for? It is on the engine from 2002 Pontiac Firebird (LS1)

Any help is appreciated!

pist0lpete

iTrader: (3)

Thats the wire for the starter. Depending on what you are swapping the engine into you may just wanna use the starting setup already in the vehicle. Or you can route the wires to that one.

bczee

iTrader: (12)

+1 on the Starter wire.. GM usually use the heavy gage purple wire for that.

bimerok

iTrader: (1)

This engine will go in to non-GM vehicle.
So is this an ignition switch signal or constant power to starter?

Thanks

bczee

iTrader: (12)

It would be to the Ignition switch (start term).

the_merv

iTrader: (88)

IGN Switch to the Starter. That Wire in the LS1 Cars goes over to the Fuse Box area for part of the VATS System.

bimerok

iTrader: (1)

Thanks for the help guys. Just finished pinging some wires and it makes sence now.