Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

ls1 s10

Thread Tools
 
Search this Thread
 
Old 07-19-2009, 02:35 AM
  #1  
Teching In
Thread Starter
 
joewarner's Avatar
 
Join Date: Jun 2009
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Default ls1 s10

I'm looking to swap a lq9/t56 into my 84 s10.

i need a list of what i will need. here is what i have so far.
1.engine
2.tranny
3.wiring harness
4.motor mounts
5.accessories
6.oil pan off h3 or ls2 pan and notch the frame.


i was reading on how to swap em into early camaros and it said something about new fuel rails for a send and recieve fuel system or something like that. they said most ls1s don't come with that as they don't need to send it back or something

basically can i get some help with what i am gonna need and if i need new fuel rails?
Old 07-19-2009, 02:15 PM
  #2  
On The Tree
iTrader: (12)
 
04600rr's Avatar
 
Join Date: May 2008
Posts: 173
Likes: 0
Received 0 Likes on 0 Posts
Default

Your best bet would be to jump on some of the s10 forums.......but a lot of these have been done on here and some go step by step.
As for the fuel system it all depends on what you want. The truck intake has a regulator and return line on it. You can swap to an ls6 manifold and use the corvette fuel filter/regulator set up. But really it is up to you.....hundreds of ways to do it
Old 07-19-2009, 05:31 PM
  #3  
TECH Enthusiast
iTrader: (3)
 
team39763's Avatar
 
Join Date: Oct 2005
Posts: 726
Likes: 0
Received 0 Likes on 0 Posts
Default

I believe there's a place called s10forum . com and they have a ton of info on the swap. Then when you get the basics done, you could come back over here and get more detailed info as far as the motor and trans.




All times are GMT -5. The time now is 09:32 AM.