6.0 conversion in 95 Caprice,,=UNDER WAY!!
#1
Staging Lane
Thread Starter
Join Date: Aug 2004
Location: Phoenix
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
6.0 conversion in 95 Caprice,,Update===DONE!!!
Well the conversion has started Removing the current Slooooooooooow 4.3 liter V8 as we speak, should be out today! Will have to do some minor frame mods but shoud be a fun conversion. Will be putting in cam,ls6 manifold, headers... Cant wait to get it done,,
This conversion has been done on several other Impala's / Caprices before so it will not be the first but will be fun anyway. Roger
This conversion has been done on several other Impala's / Caprices before so it will not be the first but will be fun anyway. Roger
Last edited by tooblue; 11-07-2005 at 05:59 PM.
#3
Staging Lane
Thread Starter
Join Date: Aug 2004
Location: Phoenix
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by AJ Bertelson
Is that the color that its in?
#4
Would also like to do this conversion. What are you going to do for headers? Motor mounts? Will you have to notch the crossmember or oil pan on the 6.0? Auto or manual? Did you start with a 9C1?
Any websites you know of where someone else has done this? Parts suppliers?
Thanks in advance for your answers,
Phil
Any websites you know of where someone else has done this? Parts suppliers?
Thanks in advance for your answers,
Phil
#5
Staging Lane
Thread Starter
Join Date: Aug 2004
Location: Phoenix
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LS1Sandrail
Would also like to do this conversion. What are you going to do for headers? Motor mounts? Will you have to notch the crossmember or oil pan on the 6.0? Auto or manual? Did you start with a 9C1?
Any websites you know of where someone else has done this? Parts suppliers?
Thanks in advance for your answers,
Phil
Any websites you know of where someone else has done this? Parts suppliers?
Thanks in advance for your answers,
Phil
Yahh I know I should just bought LS1 from a Fbody
The Caprice is not a 9c1 optioned car, its also a Non Lt1 car.
The crossmember will need to be notched and I am planning on using the stock mounts but use the adapters that S&P Sells. Will be trial fitting hopefully this in the next two weeks. Will update when I get to that point with pictures.
The Fbody headers are supposed to be very nice fit with minor adjustments on the tubes. I bought the Pacesetter long tubes and I will post as I get them trial fit for clearance.
Websites,Shiggins Impala SS = LS1 , Here is one with Tons of Photos and is what I used as a reference. The car is a 6sp car and I will be going with 4l60. Nice guy and a nice car, though I have not met him he did answer some questions as I was putting my plans together. hope it helps... Roger
Trending Topics
#8
Staging Lane
Thread Starter
Join Date: Aug 2004
Location: Phoenix
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Update on progress ,, Motor fitted,, Headers fitted,, time for detailing and final asssembly of motor once I get a few more pieces,,
Kinda hard to see with the horrible pictures but thought I would post (gotta get a better camera!!)
Kinda hard to see with the horrible pictures but thought I would post (gotta get a better camera!!)
#10
Staging Lane
Thread Starter
Join Date: Aug 2004
Location: Phoenix
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gnx7
Hats off.. that engine is absolutely clean as hell as is the "host."
What rear end are you planning on running? Any et/mph goals with the car?
What rear end are you planning on running? Any et/mph goals with the car?
Ya know I am not sure on the ET goals. My guess is that I should pick up at least 5 seconds. Now I know that seems like a lot but with previous motor it ran a blazing 18.0 (lol) The previous motor was a (L99 4.3 liter). If I get anywhere near that I will be satisfied. The Rear end was swapped to 8.5 SS Impala rear end and will end up with 3.73's. Have also purhased a new posi for the rear end.
#12
Staging Lane
Thread Starter
Join Date: Aug 2004
Location: Phoenix
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ls1_chevelle
Did you buy that intake off of pro-touring.com??? I recognize it... I bought engine mounts from the same guy.
Engine looks clean and the car has a killer paint job on it!
-Matt
Engine looks clean and the car has a killer paint job on it!
-Matt
#14
On The Tree
Join Date: Nov 2003
Location: Auburn, AL
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Any of you go to Impallassforum.com? There should be some more info on swaps there if you need anymore help.
Very clean looking car, make sure you do some suspension work as well Looks like you already got it lowered though.
Very clean looking car, make sure you do some suspension work as well Looks like you already got it lowered though.
#16
Staging Lane
Thread Starter
Join Date: Aug 2004
Location: Phoenix
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
I will add some more pictures 2morrow.. Getting much closer to firing it up. Just have some minor things to complete. Fuel pump and connector for fuel rail, exhaust. Should hopefully have all this completed by end of month
Then all it has to do is start and run!!. .. LOL,,
"Suspension" should be OK actually upgraded it some time ago.
Impala SS forum you will find that there is not much information regarding LS1 swaps. Most folks are staying with the LT1's and upgrading them.
Been a fun project so far!! Roger
Then all it has to do is start and run!!. .. LOL,,
"Suspension" should be OK actually upgraded it some time ago.
Impala SS forum you will find that there is not much information regarding LS1 swaps. Most folks are staying with the LT1's and upgrading them.
Been a fun project so far!! Roger
#17
Staging Lane
Thread Starter
Join Date: Aug 2004
Location: Phoenix
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Latest update,,,08-21
Just thought I would add some additional photo's. Still have a little more work before firing it up (mostly minor!!). Getting very close to completion though
#18
is the 4.3 liter v8 the one that looks just like the lt1? if so what are your plans with the old eng?
Killer conversion btw.
Killer conversion btw.
Last edited by justanova; 08-22-2005 at 01:05 PM. Reason: add comments
#19
Staging Lane
Thread Starter
Join Date: Aug 2004
Location: Phoenix
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by justanova
is the 4.3 liter v8 the one that looks just like the lt1? if so what are your plans with the old eng?
Killer conversion btw.
Killer conversion btw.
Last edited by tooblue; 09-12-2005 at 02:52 PM.