1976CamaroGuy

iTrader: (8)

Can't seem to find them, I have a pair of 1998 Camaro LS1 exhaust manifolds I'm going to use in my car. I also got the flanges with about 3" of pipe on them but they are pretty rough.

I would like to buy new flanges and have them welded up instead of trying to work with the old ones...

sommersracing

I never found any one making them. I had to make a set, guess I should of made more.

1976CamaroGuy

iTrader: (8)

There is an untapped market in these for sure Shame, because it's just a flat piece of steel....very easy to make for a machinist.

Jimbo1367

If I wasn't off from work healing from surgery.... I'd make you some dirt cheap. If you still need them in a month, I'd be willing. Let me know. I might have to make some for myself too.

dec010974

iTrader: (1)

my suggestion #1 is to go to the junk yard and look for a set of flanges, have your muffler shop weld them to your piping or #2 buy some expensive after market headers.

Jimbo1367

Sugg. # 3, mail me a tracing of flange with bolt & pipe dia. wait until I go back to work and get a pair cheap. I am going to make myself some anyways.
sugg. 4, buy elseware. LOL

1976CamaroGuy

iTrader: (8)

I think I'll opt for #3 lol

MeanYellowZ

iTrader: (19)

I keep a handful of the f-body, truck, and some other flanges in stock in mild steel. I'll check what I have around here if you want.

reamo04

iTrader: (9)

jakesz28.com sells them

usc2001gc

iTrader: (1)

check out spdexhaust.com under specialty flanges http://www.spdexhaust.com/pdfs/Temp_...ty_Flanges.pdf

Speedy911

iTrader: (24)

www.stainlessworks.com has tons of flanges for truck manifolds and ls
motors.

Pocket

iTrader: (22)

I cut mine from 1/4" plate using the gaskets as templates. Took about 30 mins with a torch and a grinder

1976CamaroGuy

iTrader: (8)

Here is a tracing if anyone wants to print and make thier own.

Jimbo1367

thanks, Are both sides the same?

1976CamaroGuy

iTrader: (8)

I'm pretty sure both sides are the same, I'll check when i get home.

themonkeyman89

iTrader: (2)

I know the truck manifolds vary from drivers to pass side. The pass side has an "elongated" triangle shape, but the pass side has an equilateral triangulation.

1976CamaroGuy

iTrader: (8)

Thanks for pointing that out, it was a different size....I made the adjustments in my first post with the pdf.