Need help with PVC line assy install
#1
TECH Enthusiast
Thread Starter
iTrader: (8)
Join Date: Dec 2009
Location: N. E. Arkansas
Posts: 639
Likes: 0
Received 0 Likes
on
0 Posts
Need help with PVC line assy install
ok....got my pvc valve line today from a member here, I have NO clue how this goes on in relation to my ports or even if I have it together right.
Could someone look at this and tell what goes where if they can??
Thanks in advance
#1 is the actual pvc valve I think. It looks like it could be missing a rubber piece that lets me attach it to a port
#2 this end has a plastic thing, about 5/8" in dia...but it doesn't look like it attaches to anything on my motor
#3 there's an empty spot on this "Y" that should have something attached?? Maybe a line or something? If so where does it go???
Could someone look at this and tell what goes where if they can??
Thanks in advance
#1 is the actual pvc valve I think. It looks like it could be missing a rubber piece that lets me attach it to a port
#2 this end has a plastic thing, about 5/8" in dia...but it doesn't look like it attaches to anything on my motor
#3 there's an empty spot on this "Y" that should have something attached?? Maybe a line or something? If so where does it go???
#4
TECH Fanatic
iTrader: (13)
The correct way that hose assembly goes is:
1- goes to passenger side intake port, you are missing a small hose that connects to it.
2- back driver side valve cover
3. is missing a hose that connects to the passenger side valve cover.
This hose assem you have is for 99-02 f-body valve covers.. The Pass side f-body covers have 2 ports on them. One for the missing hose in your pic & one for a hose that goes to the throttle body. The driver side has a grommet that the #2 pushes into..
1- goes to passenger side intake port, you are missing a small hose that connects to it.
2- back driver side valve cover
3. is missing a hose that connects to the passenger side valve cover.
This hose assem you have is for 99-02 f-body valve covers.. The Pass side f-body covers have 2 ports on them. One for the missing hose in your pic & one for a hose that goes to the throttle body. The driver side has a grommet that the #2 pushes into..
Trending Topics
#9
if you hook it up that way dont forget you have a vacuum port below number 2 that needs to be capped. in the picture the teal hose goes to it