78 280z 5.3 T56
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Feb 2010
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
78 280z 5.3 T56
Hello
Starting a build thread here
My project is a 1978 280z that will have a 5.3 from a 2002 Suburban and a T56 from a 2002 Camaro. I am currently working on getting the shell ready for paint and also gathering the rest of the parts for the conversion. Hopefully this doesnt take long!
Will have another update soon !
Starting a build thread here
My project is a 1978 280z that will have a 5.3 from a 2002 Suburban and a T56 from a 2002 Camaro. I am currently working on getting the shell ready for paint and also gathering the rest of the parts for the conversion. Hopefully this doesnt take long!
Will have another update soon !
#4
LS1Tech Sponsor
iTrader: (5)
What are your questions on the transmission wiring?
Jon
PSI
Jon
PSI
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
#5
Teching In
Thread Starter
iTrader: (2)
Join Date: Feb 2010
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Jay
LS240Z. I will most likley be using a speartech harness unless something better comes along.
Thanks!
I made some more progress by removing the few bolts and screws that either stripped or broke while I was disassembling the car. I also took out the front suspension to have it ready for powder coating. The old gauges were removed to make room for new aftermarket gauges that will work with the ls engine. And I picked up a big block chevy water pump and some adapters to fit it on the ls
enough with the talkin. Heres some pics
LS240Z. I will most likley be using a speartech harness unless something better comes along.
Thanks!
I made some more progress by removing the few bolts and screws that either stripped or broke while I was disassembling the car. I also took out the front suspension to have it ready for powder coating. The old gauges were removed to make room for new aftermarket gauges that will work with the ls engine. And I picked up a big block chevy water pump and some adapters to fit it on the ls
enough with the talkin. Heres some pics