PCM mounting
#1
Teching In
Thread Starter
Join Date: Jan 2013
Location: Detroit,MI
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
PCM mounting
Hey guy's I am wondering where everyone is mounting PCM's what kinda mounts ur using? If your mounting the PCM inside the car what kind of firewall grommet are you using? Pictures please
#2
Staging Lane
Join Date: Sep 2013
Location: Liberty SC
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
ECU in the glove box
I have mine inside the glove box. I cut a big rubber hose off to make the grommet. Cheap redneck engineering at it's best! I didn't want it on the fenders are even in the engine bay.
Last edited by Andy4639; 01-23-2014 at 08:32 PM.
#5
11 Second Club
I have mine mounted high up in the passenger foot well. I made a mounting plate with studs/standoffs.
For the grommet I used the stock rubber piece and cut a slit in the bottom of it for the wires. Might be worth your time to get a nice OEM looking grommet from the local junkyard if you don't already have one.
For the grommet I used the stock rubber piece and cut a slit in the bottom of it for the wires. Might be worth your time to get a nice OEM looking grommet from the local junkyard if you don't already have one.
Trending Topics
#11
TECH Fanatic
iTrader: (7)
I mounted mine on the mount for the ABS computer right beside the brake master cylinder. I used a part of the housing for my cold air kit and 2 small screws and a couple washers and it was good to go. Ugly as hell without new wire loom, but it worked until I removed it all to swap over to carb'd.