Hot side for G-body?
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Oct 2009
Location: Philly, PA
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
Hot side for G-body?
Do any of you guys know of a turn key Hot side that will fit into a G-body without alterations?
I'm looking at the CXracing Kit on Ebay. It's made for an F-body but I feel like it should work because we have more room. I'm not running any AC or anything.
http://www.ebay.com/itm/380760503742?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
I'm mainly concerned with the Headers and crossover with the T4 flange. After I get as far as I can I'm gonna drop it off to my chassis guy for cage install and finish up the cold side and down pipe.
I'm looking at the CXracing Kit on Ebay. It's made for an F-body but I feel like it should work because we have more room. I'm not running any AC or anything.
http://www.ebay.com/itm/380760503742?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
I'm mainly concerned with the Headers and crossover with the T4 flange. After I get as far as I can I'm gonna drop it off to my chassis guy for cage install and finish up the cold side and down pipe.
#3
TECH Apprentice
iTrader: (21)
As far as I know, there is no bolt in, off the shelf hot side setup for g-bodies.
The easiest option I have seen so far is to have someone like kbracing build you a log manifold and then you build the crossover and downpipe. Check out the t-type that denmah just posted over in the forced induction section. Simple turbo/hot side setup.
The easiest option I have seen so far is to have someone like kbracing build you a log manifold and then you build the crossover and downpipe. Check out the t-type that denmah just posted over in the forced induction section. Simple turbo/hot side setup.