flippincamaro

iTrader: (23)

Who makes headers to fit a 93 chevy 1500 2wheel drive ls1 conversion my project is running and driving but i have stock 98 manifolds on it when it is a 2001 engine with fully ported heads and a f1 cam .591 lift and i think headers will really help me out. Does any one know who makes them that are affordable. thank you for any help

01PewterWS6

try any of the headers that fit the 98+ trucks with 5.3 or 6.0s.
Otherwise you might have to make some, or try to borrow a buddies to see if some Fbody longtubes are close to fitting.

flippincamaro

iTrader: (23)

I had some mac mids from a 01 fbody that didnt fit cause of the frame fit with the mount and all. So maybe the newer body headers will work? i might see if i can come across a set of those. thanks

01PewterWS6

Yeah man thats really the only option I can think of besides just having to make some custom ones.
While these are expensive, these should work like a charm.
http://www.jegs.com/cgi-bin/ncommerc...60&prmenbr=361

Really any of the truck headers for 98+ Chevys should work, chassis is still primarily the same.

LS1GMCTruck

iTrader: (2)

I'm using the Street & Performance "G-Body" headers, that fit really well. Same install as you have. Would have much rather had 1 3/4" primaries though, as the S & P's are only 1 5/8". Oh, well. Would have much rather found long tubes, which the S & P's are not. Oh, well. Their better than the stocker's & fit nice. Ordered them coated, inside & out. Hope this helps. Gar

flippincamaro

iTrader: (23)

How much were they for the s&p headers that is where i got my motor mounts from for the conversion thanks for all the help guys

LS1GMCTruck

iTrader: (2)

But, at the time(about a year ago), they were the only headers I could find that would fit without going back and forth, playing the guessing game. I paid $495.00 plus shipping. Not getting them high temperature coated was less $$. Give them a call. They were very helpful everytime I called. Gar

flippincamaro

iTrader: (23)

thanks