90 Mustang LX with LS1 carburetor...need help
#1
90 Mustang LX with LS1 carburetor...need help
Me and my friends finished this project today,it has LS1 with ported heads,23×/23× 110LSA cam(×=cant remember the last number),victor jr intake swap with 750cfm holley carb,TH-350 with shift kit,4500 stall and 3.73 but we got a problem that the car cut offs at 4000 and we dont know which curve chip to use (we lost the paper that comes with the MSD 6SL module) we put curve 2 and the car cut offs at 4000 we putted curve 1 and it cut offs really hard around 3800 so which curve chip we use? I will post pictures later
#3
11 Second Club
iTrader: (11)
Join Date: Aug 2004
Location: TULSA
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
http://msdignition.com/ignition_33_6010.htm
i dont think you should be running into that problem, but nice lookin setup though.
i dont think you should be running into that problem, but nice lookin setup though.
#6
btw smax I think we need to tune the module right? we didnt do that we just finished the project put curve 2 chip start the car take it for a lil ride give it a lil gas the car cut offs at 4000 RPM,from the instructions of the PRO DATA+ do I need to run this software first? or its ok if not?
Trending Topics
#11
we told the owner he dont need 4500stall a 3500 is good enough for his cam but he refused and bought this 4500stall for cheap the car is too heavy in the start
btw Im not the owner im just the builder with the owner and couple of friends
btw Im not the owner im just the builder with the owner and couple of friends
#15
TECH Regular
iTrader: (12)
i just got my carb setup running and i dont have any issues with it cutting out. i think i bounced it off the rev limiter today. i have it set at 6500. if you need the install instructions you can easuly find them on line but since i have the image scanned on my computer ill post it up.
i used pill #1 so far just to get it started and it works great. im running a MS3 cam, 750 mighty demon, and texas speed ported heads.
i used pill #1 so far just to get it started and it works great. im running a MS3 cam, 750 mighty demon, and texas speed ported heads.
#16
thnx man,we programmed the rev limiter and DAAAAMN that car fly lool we didnt finished the break in and we already flooring it but we are facing a small problem that we will fix soon I hope the C5s and C6s in our country are armed to this LStang