First Mock-up of carb manifold w/TBI..6.0L
#1
TECH Resident
Thread Starter
First Mock-up of carb manifold w/TBI..6.0L
This is my first mock-up. I think it will all work out ok and the Cadillac early air cleaner will look correct in my '35 Ford. The MAF will be stacked on top of the throttle body.....I don't have a MAF to mock up right now,the only one I have at the moment is one that was blown apart by a little too much boost (courtesy of Vortech).
#3
TECH Resident
Thread Starter
The air filter will sit a little higher than you see there, I will make sure it's not restricted. I figure that some times you need to make small compromises but the performance should be acceptable.
#6
11 Second Club
iTrader: (11)
Join Date: Aug 2004
Location: TULSA
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
If you have the hood clearance maybe it wouldn't be too hard to raise the breather up a little and build a short elbow inside it to move the maf a little further up stream. It will work either for sure, but I am probably just thinking max output so don't pay much attention to me.