Cam Install Question
#1
Registered User
Thread Starter
Join Date: Sep 2008
Location: Wilmington, MA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Cam Install Question
Hey Folks,
Putting the vette away for the winter this weekend and I'm going to be tearing apart the engine and replacing most of the top end. I want to put a cam and possibly heads (if I can find a set of used heads cheap enough). Is there anything special that I need in order to do this? Are there things like if I'm 1mm off on something the engine will blow (regarding cam install), etc? Any tips/links to guides/suggestions would be appreciated. I will also probably be doing lifters, valve springs and rocker arms.
Thanks.
Putting the vette away for the winter this weekend and I'm going to be tearing apart the engine and replacing most of the top end. I want to put a cam and possibly heads (if I can find a set of used heads cheap enough). Is there anything special that I need in order to do this? Are there things like if I'm 1mm off on something the engine will blow (regarding cam install), etc? Any tips/links to guides/suggestions would be appreciated. I will also probably be doing lifters, valve springs and rocker arms.
Thanks.
Last edited by VolatileC5z; 12-10-2008 at 10:11 AM.
#3
Dumb Ass Vette Moderator
iTrader: (20)
everything you need to know is right here bro!
http://www.ls1howto.com/
http://www.ls1howto.com/
#4
On The Tree
iTrader: (1)
Join Date: Nov 2005
Location: Folly Beach, SC
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
everything you need to know is right here bro!
http://www.ls1howto.com/
http://www.ls1howto.com/