New build. LS7 w/ nitrous 250shots??
#1
New build. LS7 w/ nitrous 250shots??
some of you might have seen my older thread where my engine dropped a valve due to not having lash caps installed with my new ported WCCH heads. that happened on march 17th I think.
after a lot of thinking (and I mean alot, two months!!) I finally decided what I wanted to do on May 24th and started ordering the main parts on May 27th. The car was supposed to be ready end of july but there were a lot of delays on parts (we first ordered some wiseco pistons but waited 8 weeks and they never showed up, so cancelled that order and went with Diamonds which took about 3 weeks to get) then there was a lot of delays from the machine shop since they were bulding my buddys engine and another engine for a competition and they were working on other stuff... at first I didnt have a clutch so I told them it wasnt a big deal and they can start on it when I order one..... you get the idea.
the build consist of....
- Darton sleeved LS7 Block by a local machine shop.
- 441ci stroker ( callies crank, rods, and daimond pistons w/ nitrous rings)
- almost 14.0:1 compression (scared especially since I am planning to spray 250shots!)
- will be running E85
- vette-air heads/cam pkg
- Stock angle milled LS7 Heads by wcch with SS exhaust valves
- black widow revised cam with duel springs
- Morel lifters (link bar)
- CHE rockers
- Innovators West damper
- all ARP hardware and block is machined for larger studs (just to be safe)
- Ported Fast intake with Nitrous outlet direct port
- Nitrous outlet nitrous kit with 102 plate (planning to do 2 stages)
- 2- nano 4500 kits and 2- 15lbs bottles
- NMS1000 nitrous controller
- Stock fuel pump with 80lbs injectors.
- NW102 TB
- Halltech KB2 CAI
- LG 1 7/8 super pro headers with off-road xpipe
- Stock exhaust
- RPS BC3 Clutch
- level 4 built T56
- stock rearend
I am sure I am missing few things but thats pretty much it. The plan is to run 10s consistent at this elevation (5800ft) N/A and maybe 9s with nitrous? who knows we will find out I guess:thumbs:
hopefully the car will be done next week. put some miles on the new engine/clutch and hopefully get it on the dyno by end of the month!!?:crazy: we will see!
hoping to hit 630+whp/580+wtq N/A and I wont be spraying until June since the car wont be driven much with winter coming now.
here is few pics... I didnt take any recent ones
let me know what you guys think!
after a lot of thinking (and I mean alot, two months!!) I finally decided what I wanted to do on May 24th and started ordering the main parts on May 27th. The car was supposed to be ready end of july but there were a lot of delays on parts (we first ordered some wiseco pistons but waited 8 weeks and they never showed up, so cancelled that order and went with Diamonds which took about 3 weeks to get) then there was a lot of delays from the machine shop since they were bulding my buddys engine and another engine for a competition and they were working on other stuff... at first I didnt have a clutch so I told them it wasnt a big deal and they can start on it when I order one..... you get the idea.
the build consist of....
- Darton sleeved LS7 Block by a local machine shop.
- 441ci stroker ( callies crank, rods, and daimond pistons w/ nitrous rings)
- almost 14.0:1 compression (scared especially since I am planning to spray 250shots!)
- will be running E85
- vette-air heads/cam pkg
- Stock angle milled LS7 Heads by wcch with SS exhaust valves
- black widow revised cam with duel springs
- Morel lifters (link bar)
- CHE rockers
- Innovators West damper
- all ARP hardware and block is machined for larger studs (just to be safe)
- Ported Fast intake with Nitrous outlet direct port
- Nitrous outlet nitrous kit with 102 plate (planning to do 2 stages)
- 2- nano 4500 kits and 2- 15lbs bottles
- NMS1000 nitrous controller
- Stock fuel pump with 80lbs injectors.
- NW102 TB
- Halltech KB2 CAI
- LG 1 7/8 super pro headers with off-road xpipe
- Stock exhaust
- RPS BC3 Clutch
- level 4 built T56
- stock rearend
I am sure I am missing few things but thats pretty much it. The plan is to run 10s consistent at this elevation (5800ft) N/A and maybe 9s with nitrous? who knows we will find out I guess:thumbs:
hopefully the car will be done next week. put some miles on the new engine/clutch and hopefully get it on the dyno by end of the month!!?:crazy: we will see!
hoping to hit 630+whp/580+wtq N/A and I wont be spraying until June since the car wont be driven much with winter coming now.
here is few pics... I didnt take any recent ones
let me know what you guys think!
#3
TECH Senior Member
iTrader: (5)
It'll be a beast.......like, nasty, motor alone. It's gonna be hardcore with that kind of compression on the street...E85 always for here on out. Compression makes power though. So,..that'll do it. But good lord. It'll be a very unique sounding car(streetcar) on the throttle. On Spray,...it's gonna sound like death coming.
You'll probably rarely, if ever, use the spray to beat majority of the cars out there on the street man.
You'll probably rarely, if ever, use the spray to beat majority of the cars out there on the street man.
#4
TECH Addict
iTrader: (1)
Join Date: Sep 2007
Location: Orange Park Fl
Posts: 2,206
Likes: 0
Received 0 Likes
on
0 Posts
It'll be a beast.......like, nasty, motor alone. It's gonna be hardcore with that kind of compression on the street...E85 always for here on out. Compression makes power though. So,..that'll do it. But good lord. It'll be a very unique sounding car(streetcar) on the throttle. On Spray,...it's gonna sound like death coming.
You'll probably rarely, if ever, use the spray to beat majority of the cars out there on the street man.
You'll probably rarely, if ever, use the spray to beat majority of the cars out there on the street man.
#5
TECH Senior Member
iTrader: (5)
Right?
A really good tire out back,..something good for high speed, and grip(RA1 for us 18" guys)...for motor,...it'll be crazy to drive the car with ANYTHING OTHER THEN THAT, EVER. lol. 550rwhp ALL motor is spin city on a C5 with that power(Z rated tire-1-4th),....C6 vettes, DO handle power much better, and are easier to launch, so he has THAT going for him. But, SPRAY....ha,..we used to wack that same 550 wheel HP C5 with a 250(no controller) from a roll and holy ****,...you had to really be dialed in to drive that car. The AMS 1000.....will help A LOT....but....I just don't think he's gonna run into that many cars that he's gonna need to use it on.
Myabe some 900-1000 cars but,...I think with 650 MOTOR to the ground,...800hp cars will have hell to pay to catch up to it. Unless he's planning on some hardcore roll racing against the big boys.
It'll be a hoot for sure.
#7
It'll be a beast.......like, nasty, motor alone. It's gonna be hardcore with that kind of compression on the street...E85 always for here on out. Compression makes power though. So,..that'll do it. But good lord. It'll be a very unique sounding car(streetcar) on the throttle. On Spray,...it's gonna sound like death coming.
You'll probably rarely, if ever, use the spray to beat majority of the cars out there on the street man.
You'll probably rarely, if ever, use the spray to beat majority of the cars out there on the street man.
i am kinda scared with that high compression. not sure how tuning will go!!
Trending Topics
#8
I have 335 NT05s in the back which where great at 590whp. I might consider the NT05r drag radials for the street to if I started having issues N/A. maybe even with a 150shot.... I will be doing 2 stages, probaly 150shot and anther 100shot for the 2nd stage. hopefully I will be able to hook with that 1 stage. the 2nd stage will be only used for the track!!
#9
Right?
A really good tire out back,..something good for high speed, and grip(RA1 for us 18" guys)...for motor,...it'll be crazy to drive the car with ANYTHING OTHER THEN THAT, EVER. lol. 550rwhp ALL motor is spin city on a C5 with that power(Z rated tire-1-4th),....C6 vettes, DO handle power much better, and are easier to launch, so he has THAT going for him. But, SPRAY....ha,..we used to wack that same 550 wheel HP C5 with a 250(no controller) from a roll and holy ****,...you had to really be dialed in to drive that car. The AMS 1000.....will help A LOT....but....I just don't think he's gonna run into that many cars that he's gonna need to use it on.
Myabe some 900-1000 cars but,...I think with 650 MOTOR to the ground,...800hp cars will have hell to pay to catch up to it. Unless he's planning on some hardcore roll racing against the big boys.
It'll be a hoot for sure.
A really good tire out back,..something good for high speed, and grip(RA1 for us 18" guys)...for motor,...it'll be crazy to drive the car with ANYTHING OTHER THEN THAT, EVER. lol. 550rwhp ALL motor is spin city on a C5 with that power(Z rated tire-1-4th),....C6 vettes, DO handle power much better, and are easier to launch, so he has THAT going for him. But, SPRAY....ha,..we used to wack that same 550 wheel HP C5 with a 250(no controller) from a roll and holy ****,...you had to really be dialed in to drive that car. The AMS 1000.....will help A LOT....but....I just don't think he's gonna run into that many cars that he's gonna need to use it on.
Myabe some 900-1000 cars but,...I think with 650 MOTOR to the ground,...800hp cars will have hell to pay to catch up to it. Unless he's planning on some hardcore roll racing against the big boys.
It'll be a hoot for sure.
#11
I think the stock fuel pump will be able to support up to 100-150shot MAX. but we will see when we put it on the dyno. again we lose about 100whp due to elevation so at sea-level it will be different
#16
updates...
engine is in
injectors were too tall and the solenoids will hit the firewall, so bought some 95# short injectors and we will modify some of the tubes for the jets to make it fit right without cutting the firewall. hopefully they will get here tomorrow. missing the 102 plate for the 2nd stage, not sure when that will get here. I still need to order a wideband and fuel pressure sensors for my aeroforce gauges. pretty much everything else is ready... hopefully we will fire up the car Friday
engine is in
injectors were too tall and the solenoids will hit the firewall, so bought some 95# short injectors and we will modify some of the tubes for the jets to make it fit right without cutting the firewall. hopefully they will get here tomorrow. missing the 102 plate for the 2nd stage, not sure when that will get here. I still need to order a wideband and fuel pressure sensors for my aeroforce gauges. pretty much everything else is ready... hopefully we will fire up the car Friday