In car video...
#1
9 Second Club
Thread Starter
iTrader: (1)
Join Date: Nov 2008
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
In car video...
Went to a TNT at Maple Grove today....
So windy only running the 1/8th....
Car went 6.40's at 109.
Enjoy!
http://www.youtube.com/watch?v=OLuqpKcpEig
Dave
So windy only running the 1/8th....
Car went 6.40's at 109.
Enjoy!
http://www.youtube.com/watch?v=OLuqpKcpEig
Dave
#6
9 Second Club
Thread Starter
iTrader: (1)
Join Date: Nov 2008
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
The motor is a stock LQ4 with L92 heads and Rapid motorsports cam.
Should be considered a cam only engine w/carb.There was once a cam only LS list... take a look at it now, I have my own category...Hybrid/conversion LQ4 cam only cars....BS
did have it on the rollers.. the custom carb was dead lean because the rollers do not properly load the engine(dynojet). tried to richen it up without success, ended up reverting to the original set up at the track.. has gone 9's.
good thing we don't race dyno's! it made 403hp with tires rubbing on the inner wheel wells and 13.5 a/f...!!!!
weighs 2900 w/driver.
Dave
Should be considered a cam only engine w/carb.There was once a cam only LS list... take a look at it now, I have my own category...Hybrid/conversion LQ4 cam only cars....BS
did have it on the rollers.. the custom carb was dead lean because the rollers do not properly load the engine(dynojet). tried to richen it up without success, ended up reverting to the original set up at the track.. has gone 9's.
good thing we don't race dyno's! it made 403hp with tires rubbing on the inner wheel wells and 13.5 a/f...!!!!
weighs 2900 w/driver.
Dave