WSsick

iTrader: (13)

Friend of mine finally got his car to the track. He only got to make 2 passes though, and tech is strict so after #2 they warned him to slow it down without a cage and such.

60' was 1.78 on pass #1 and 1.69 on pass #2, so there's definitely a lot left in it.

Quick mod list...

Motor:
-Forged LS3
-PRC 237cc heads
-forged rods/pistons
-Pat G cam (23x/23x 113)
-ported FAST 102

Trans:
-4L60e built by silverz28camaro on here
-Yank SS4000 converter

Wheels & Tires:
-17" ET Streets
-10 spokes all around but narrowed in the front with a 185/xx-17 in front.

Susupension:
-QA1s up front
-stock 10 bolt with 3.23s
-LCAs & relocation brackets
-Midwest Chassis TA
-Tubular K-member with upper and lowers


And some weight reduction. Car made 458rwhp on the dyno.

sabersaw30

iTrader: (10)

Where did you get the front rims?I want some of them.Pulls like a freight train.Looks like your Trans shifts strong too.

LS1rob00

iTrader: (9)

Nice! Car runs strong. Definitely room in the 60' especially with the 10 Bolt and 3:23's. That rear is on borrowed time lol.

WSsick

iTrader: (13)

Not my car, my friend's.


He sent them off to get narrowed like that.

raymond mckinney

iTrader: (4)

That gear is prolly the only reason the 10bolt is lasting. Funny my old motor was almost exactly the same and the car run the same 60fts and times.

raymond mckinney

iTrader: (4)

What was the 1/8 mile et and mph?

WSsick

iTrader: (13)

I'll see if he can send me a pic of the timeslip. Another trip to a track is planned for next month.

PewterScreaminMach

iTrader: (7)

Wow, that's a strong running car. Curious to see the 1/8 times, as well, and what's the weight?

stumprrp

iTrader: (2)

Great time! Ive always loved that car

speedtigger

iTrader: (16)

That is a very impressive car. I would have been impressed with those times if you said it was a 408.

WSsick

iTrader: (13)

Sorry for getting back so late. Been a long week.


1/8 was 6.96 @ 102

Weight is just a tad below 3100 without driver.

WSsick

iTrader: (13)

And a picture of the narrowed 10 spokes, just because I love his wheels.

N2RACINGLS1's

iTrader: (2)

Good running car it sounds very strong going down the track. That is about what I have gotten my car's weight down to.

I Love the narrowed front wheels.

N2