New best-10s On Motor!!
#1
9 Second Club
Thread Starter
Join Date: Aug 2003
Location: Raleigh NC
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
New best-10s On Motor!!
The RPM Crew went to Rockingham last nite, lots of new best, I'll let them post up. For me the air got better and better. I made three passes.
1st pass
60 ft.....1.53
1/8.......7.003
1/8mph..97.50
1/4.......11.040
1/4mph..121.03
2nd
60ft.......1.53
1/8........7.001
1/8mph..98.01
1/4.......11.017
1/4mph..121.08
The One!!
60ft.......1.52
1/8........6.955
1/8mph...98.16
1/4........10.96
1/4mph...121.89!
This is on motor, stock bottom-end on 275/60/15 M/T DRs. A big thanks to RPM!!
10sec club Please!!
I'm in the 10s Beyotch!!!
1st pass
60 ft.....1.53
1/8.......7.003
1/8mph..97.50
1/4.......11.040
1/4mph..121.03
2nd
60ft.......1.53
1/8........7.001
1/8mph..98.01
1/4.......11.017
1/4mph..121.08
The One!!
60ft.......1.52
1/8........6.955
1/8mph...98.16
1/4........10.96
1/4mph...121.89!
This is on motor, stock bottom-end on 275/60/15 M/T DRs. A big thanks to RPM!!
10sec club Please!!
I'm in the 10s Beyotch!!!
#4
11 Second Club
iTrader: (25)
Join Date: Nov 2004
Location: Pensacola, FL
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
Congrats!, again. How much power are you putting down? I just noticed we got the same cam and I'm trying to figure out what heads I should go with. I'm also trying to acomplish 10's on motor, but w/a M6.
#5
9 Second Club
Thread Starter
Join Date: Aug 2003
Location: Raleigh NC
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by REDSS01
Congrats!, again. How much power are you putting down? I just noticed we got the same cam and I'm trying to figure out what heads I should go with. I'm also trying to acomplish 10's on motor, but w/a M6.
373 rwtq