New BeaSSt Update!!!
12-01-2002, 06:20 PM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Pearland
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
New BeaSSt Update!!! The BeaSSt is running at HRP right now and has run a new best right off the trailer. I don't have all of the details, but...
1.34x 60', 9.75x @ 138.xx!!!
We have fixed the cracked oil pan and did a little suspension tuning with Joe's help since Thunder... Hopefully they will get the record later this evening.
-Kevin
1.34x 60', 9.75x @ 138.xx!!!
We have fixed the cracked oil pan and did a little suspension tuning with Joe's help since Thunder... Hopefully they will get the record later this evening.
-Kevin
12-01-2002, 06:24 PM
#2
Re: New BeaSSt Update!!! Awesome, keep us posted.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
12-01-2002, 06:49 PM
#4
Re: New BeaSSt Update!!! <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> Keep us posted <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
1st pass too <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> awesome <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
1st pass too <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> awesome <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
12-01-2002, 07:29 PM
#5
TECH Apprentice
Join Date: Nov 2001
Location: ROWLETT TX USA
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
Re: New BeaSSt Update!!! I also recieved a phone call from some strange man claiming to be David Douberly. He gave me the same info, I wonder if it could be true <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> . Good luck guy's , post up when you get home.
12-01-2002, 07:33 PM
#7
TECH Fanatic
Join Date: Nov 2001
Location: Katy, TX
Posts: 1,497
Likes: 0
Received 0 Likes
on
0 Posts
Re: New BeaSSt Update!!! Dads up there spectating, and he just called and told me the good news! Congrats guys!
Dad said they just pulled a wheel stand high enough to make the oxygen mask fall out of the headliner! Details Lanky gimme some details!!!!
<small>[ December 01, 2002, 07:34 PM: Message edited by: PaiN ]</small>
Dad said they just pulled a wheel stand high enough to make the oxygen mask fall out of the headliner! Details Lanky gimme some details!!!!
<small>[ December 01, 2002, 07:34 PM: Message edited by: PaiN ]</small>
Trending Topics
12-01-2002, 07:36 PM
#8
On The Tree
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Pearland
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Re: New BeaSSt Update!!! Yes Pain, they are done. Looks like they watched your video too closely and were jealous!!!
They left off the transbrake at 3k on the first run and everything went well. For the second run, they decided to try a 4k launch... After a 1.39 60' with the back wheels the car slammed down pretty hard. BIG crack in the oil pan, crushed filter, etc... The night is done.
I am sure Dave or Stephen will post more details when they get home.
Maybe next week <img border="0" title="" alt="[Sad]" src="gr_sad.gif" />
-Kevin
They left off the transbrake at 3k on the first run and everything went well. For the second run, they decided to try a 4k launch... After a 1.39 60' with the back wheels the car slammed down pretty hard. BIG crack in the oil pan, crushed filter, etc... The night is done.
I am sure Dave or Stephen will post more details when they get home.
Maybe next week <img border="0" title="" alt="[Sad]" src="gr_sad.gif" />
-Kevin
12-01-2002, 09:21 PM
#12
TECH Senior Member
Re: New BeaSSt Update!!! AWESOME! Congrats! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Look like the Douberlys, Pain, myself, and a few others will all be running wheelie bars before long. <img src="http://64.127.132.31/smilies/pain.gif" alt=" - " />
Look like the Douberlys, Pain, myself, and a few others will all be running wheelie bars before long. <img src="http://64.127.132.31/smilies/pain.gif" alt=" - " />
12-01-2002, 09:27 PM
#13
Adkoonerstrator
iTrader: (4)
Join Date: Nov 2001
Location: Deep in the seedy underworld of Koonerville
Posts: 21,420
Likes: 0
Received 0 Likes
on
0 Posts
Re: New BeaSSt Update!!! Here ya go Colonel <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
<img src="http://64.127.132.31/smilies/pain1.gif" alt=" - " />
John
<img src="http://64.127.132.31/smilies/pain1.gif" alt=" - " />
John
12-02-2002, 01:20 AM
#17
TECH Addict
Join Date: Nov 2001
Location: Angleton/Lake Jackson (South of Houston)
Posts: 2,022
Likes: 0
Received 0 Likes
on
0 Posts
Re: New BeaSSt Update!!! <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> Congrads on the new best. Im sure you know the oil pan part number by hart. I wish I would of went to the track insted of wasting my money on AutoRama. <img border="0" title="" alt="[Sad]" src="gr_sad.gif" /> Cause it sucked.
ALbert
ALbert
12-02-2002, 07:56 AM
#19
TECH Apprentice
iTrader: (1)
Join Date: Nov 2001
Location: Pearland Texas
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Re: New BeaSSt Update!!! Thanks for the comments guys, we really appreciate it <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Dave
SAM 436
www.thebeasst.com
Dave
SAM 436
www.thebeasst.com
12-02-2002, 08:07 AM
#20
TECH Junkie
Join Date: Nov 2001
Location: Melbourne, FL
Posts: 3,987
Likes: 0
Received 0 Likes
on
0 Posts
Re: New BeaSSt Update!!! Damn, the BeaSSt is hauling ***! Great job, guys!!!!
Madman, I think we could definately use a GP on wheelie bars. I'd be up for it myself. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Madman, I think we could definately use a GP on wheelie bars. I'd be up for it myself. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />