SOLD 2002 NBM Trans Am M6 SOLD SOLD SOLD!!
03-30-2013, 08:35 AM
#1
SOLD 2002 NBM Trans Am M6 SOLD SOLD SOLD!! SOLD SOLD SOLD
Walk Around Video
http://s1169.photobucket.com/user/Th...8_711.mp4.html
Car:
2002 Pontiac Trans Am
- 2nd owner
- 47,800 miles
- M6 trans zero issues (Tick Perf Master & Textraila OZ-700 Z grip clutch)
- 3" steel DS (Denny's)
- Moser 12 Bolt 4.10's Tru trac
- Corsa Cat back
- Dynatech Headers (Stainless) and Catted Y
- Vengence VRx4 cam 228/230
- NBM paint with Taupe leather int.
- All options except WS.6 and CD changer
- QA1 R Series Front Shocks
- QA1 10 Way Rear Shocks
- BMR Weld in SFC's, Rear LCA's, and Pan Hard rod
- BMR TQ arm relocation kit w/ Adj TQ arm
- UMI Drag rear bar
- UMI D/S Loop
- Stock Hurst Shifter
- US Exotics WS.9 Hood (perfectly aligned see pics)
- Raptor Shift light
- SLP Line lock
- SLP Lid
- SLP Under Drive Pulley
- Earlier WS.6 17" Rims
- New front tires
Comes with most of the stock parts and that will go to if someone buys it. (Bring a friend with a truck)
Title is clear
- Also have window sticker.
ignore the convo's they were were sold
BUFFED SPOILER
Before:
After:
Reflection:
Thanks!
-Aaron
I may throw in a free buff if the deal is right.
Walk Around Video
http://s1169.photobucket.com/user/Th...8_711.mp4.html
Car:
2002 Pontiac Trans Am
- 2nd owner
- 47,800 miles
- M6 trans zero issues (Tick Perf Master & Textraila OZ-700 Z grip clutch)
- 3" steel DS (Denny's)
- Moser 12 Bolt 4.10's Tru trac
- Corsa Cat back
- Dynatech Headers (Stainless) and Catted Y
- Vengence VRx4 cam 228/230
- NBM paint with Taupe leather int.
- All options except WS.6 and CD changer
- QA1 R Series Front Shocks
- QA1 10 Way Rear Shocks
- BMR Weld in SFC's, Rear LCA's, and Pan Hard rod
- BMR TQ arm relocation kit w/ Adj TQ arm
- UMI Drag rear bar
- UMI D/S Loop
- Stock Hurst Shifter
- US Exotics WS.9 Hood (perfectly aligned see pics)
- Raptor Shift light
- SLP Line lock
- SLP Lid
- SLP Under Drive Pulley
- Earlier WS.6 17" Rims
- New front tires
Comes with most of the stock parts and that will go to if someone buys it. (Bring a friend with a truck)
Title is clear
- Also have window sticker.
BUFFED SPOILER
Before:
After:
Reflection:
Thanks!
-Aaron
I may throw in a free buff if the deal is right.
Last edited by BlackScreaminMachine; 05-05-2013 at 03:04 PM. Reason: SOLD!!
03-31-2013, 08:45 AM
#2
Got some more work done. Spent easily 8 hours on it but the front clip corrected quicker as its newer clear. After buffing 2 coats of ultimate wax. So easy to work with.
Last edited by BlackScreaminMachine; 04-16-2013 at 06:12 AM.
03-31-2013, 03:30 PM
#4
Vengence Racing VRx4 Cam 228/230 .588/.592 112
Ported 90/90 by Vengence, Sanded and Painted
SLP Flow Pack (no smooth bellow)
SLP U/D pulley
Dynatech SuperMaxx Headers w/ emission w/ CATS
Corsa Cat back
Textralia oz-700 Z-grip
Moser 12 Bolt w/ 4.10's
3" Steel DS
Stock Heads, Waterpump, Rockers, Injectors, and Fuel Pump, Dyno Tuned.
A quick Run down on past dyno's
Stock w/ Lid, m6, 10 bolt:
324 RWHP @ 5,300 rpms
346.7 RWTQ @ 4,450 rpms
Lid, 12 bolt, DS, Headers, Cat back, bolt on dyno tune:
UN-Corrected:
1st pull: 336.6 RWHP @ 5,500 rpms;
5th pull: 350.6 RWHP @ 5,500 rpms;
1st pull: 355.0 RWTQ @ 4,500 rpms;
5th pull: 361.8 RWTQ @ 4,500 rpms;
Corrected:
1st pull: 326.8 RWHP @ 5,500 rpms;
5th pull: 339.9 RWHP @ 5,500 rpms;
1st pull: 344.7 RWTQ @ 4,500 rpms;
5th pull: 350.8 RWTQ @ 4,500 rpms;
Cam/Intake/UD pulley Swap:
396 RWHP @ 6,200
375 RWTQ @ 4,500
TQ was over 350 @ 3,500
This was with a retune which didnt do much over the bolt on tune, minor clean up. Dirty air filter and fuel filter and heavier drive line
Had it been a stocker drive line, it wouldnt be un reasonable that it would 412-415 rwhp on a MILD cam that drives like stock, and has a nice, exotic sound w/ the cat back.
I did end up swapping back to a LS6 intake as I never went to ported heads and money just sitting there. Willing to wager the turbulence was a whole lot less and felt a ton better on the street. Simply did not need it.
Over all happy with the car but its time to cut her loose.
http://s1169.photobucket.com/user/Th...8_711.mp4.html
Last edited by BlackScreaminMachine; 05-05-2013 at 02:52 PM.
Trending Topics
04-03-2013, 01:52 PM
#9
TECH Regular
Join Date: Mar 2006
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Cleanest interior I have ever seen for a car over 10 years old! It looks brand new, but faster. My money situation will hopefully change in a few months, I wish I could afford it today. Good luck, you shouldn't need it!
04-04-2013, 05:30 AM
#10
Thank u sir. To be honest I'd rather not sell it but stuff coming up and not using it nearly as much as I'd like as u can see with milage and garage stored since I've owned it. Its a great car. I'll start posting locally at this point.
