Anyone Using Cartek (Garwood,NJ) Read This & Watch Video
01-11-2009, 03:22 PM
#1
On The Tree
Thread Starter
iTrader: (11)
Join Date: Nov 2008
Location: Ocean County, NJ
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Anyone Using Cartek (Garwood,NJ) Read This & Watch Video ViciousZ Corvette out of NY Took his Car to Cartek to have it built and was given 2yr 24,000 warranty. From video he had lost oil press and they did rebuild the motor again but still didn't put the parts into the motor that are on the bill and they didn't even bore the motor to the spec of what was contracted.
$$$26,000 dollar they took from this guy <Alot of money>
http://videos.streetfire.net/video/C...ain_210547.htm
Good job Cartek!!
Take care of your customers or Word spreads real fast.
Pass it along guys.
BoostedLQ9SS
$$$26,000 dollar they took from this guy <Alot of money>
http://videos.streetfire.net/video/C...ain_210547.htm
Good job Cartek!!
Take care of your customers or Word spreads real fast.
Pass it along guys.
BoostedLQ9SS
01-11-2009, 04:18 PM
#6
if he was going to use parts other than what was on the original reciept he should have 1. called customer to see if that would be ok! 2.replace what was ruined with the EXACT part! 3.be a man and honor his warranty no matter the cost!
sorry to hear you have spent the amount of cash that you have previously.that really sucks!
sorry to hear you have spent the amount of cash that you have previously.that really sucks!
Last edited by 96lt1m6; 01-11-2009 at 05:55 PM.
Trending Topics
01-11-2009, 06:51 PM
#11
I'm not on anyone's side but...
LS7 block is FINISHED to 4.130 does not mean a 4.130 piston, you need to have .005-.007 of clearance between the piston wall and the piston.
The lifter issue is another story, I have had Morel, Crane, Comp and GM's. I can't tell the difference.
LS7 block is FINISHED to 4.130 does not mean a 4.130 piston, you need to have .005-.007 of clearance between the piston wall and the piston.
The lifter issue is another story, I have had Morel, Crane, Comp and GM's. I can't tell the difference.
