Norris Motorsports Official Grand Re-Opening Dyno/BBQ Sept 29th & 1999 Pricing
08-31-2007, 04:20 PM
#1
Norris Motorsports Official Grand Re-Opening Dyno/BBQ Sept 29th & 1999 Pricing Hey All,
I am finally up and operational and I just wanted to invite folks to the new location on Saturday, Sept 29th for a get together for some burgers, dogs, snack and drinks (sorry no alcohol) for friends, clients and enthusiasts alike. The dyno will be running, but on a limited basis so I can spend some time with everyone. Hopefully the end of September will bring some pleasant weather for us.
During the day the dyno will be available for $25 for 2-3 pulls. There will also be an hourly drawing for a free on the spot set of base dyno runs. If your name is pulled and you are not there, that ticket will go back in so you have another chance and another ticket will be pulled.
There will also be another drawing at the end of the day for a free full chassis dyno tune. You do not have to be present to win, just have to be there at some time during the day.
I am figuring on officially starting at 10AM, but can start earlier if folks would prefer. Just feel free to let me know. As long as folks are around we can go till sundown if you would like. Or we can set up a cruise and hit a night spot later on.
Here is a Google map for everyone:
http://maps.google.com/maps?q=101+1s...i=map&ct=title
As most may have noticed from my previous posts, I am at this time not getting into engine builds, trans disassembly or rear end disassembly. The owner of the property prefers to keep as clean as possible from an environmental point of view and wants no oil stored on site or potential large messes. What I can handle any bolts on packages from cold air intakes, to header to superchargers as well as complete trans assemblies, clutches, converters, rear end assemblies, suspension, brakes and of course tuning. I will also be offering excellent pricing on parts and parts packages for everyone.
As I mentioned before there will be several Retro Priced Specials going on to again show my appreciation over the past 8 ½ years. Basically going back to 1999 pricing on a lot of items and even lower. Here is a sampling for you all and this is starting as of this posting. This pricing starts today and we can schedule you in as early as next week depending on what you need to have done.
LSx F-Body American Racing Headers Installed Package $1979
Includes before dyno, 1 3/4” or 1 7/8” primaries, high flow cats, oxygen sensor extensions, 160* thermostat, GM exhaust gaskets, Stage 8 locking header bolts, NGK TR55 spark plugs and a full in house chassis dyno tune. For those wanting to eliminate or change some items the pricing can be adjusted accordingly.
LSx F-Body Dynatech Supermaxx Headers Installed Package $2179
Includes before dyno, 1 3/4” primaries, high flow cats, oxygen sensor extensions, 160* thermostat, GM exhaust gaskets, Stage 8 locking header bolts, NGK TR55 spark plugs and a full in house chassis dyno tune. For those wanting to eliminate or change some items the pricing can be adjusted accordingly.
LSx Tuning Pricing
Naturally Aspirated $350 Group of 3 or more in a day $300 each
Forced Induction or Nitrous $400 Group of 3 or more in a day $350 each
Basic Simple Changes $95 Group of 3 or more in a day $75 each
RPM Transmissions Level IV M6 Installed $1895, includes fluids, freight and no core charge. LSx F-Body
Add for upgrade to Level V Trans $400
Add for Charlie@RPM clutch bleed line $89
RPM Transmissions Level IV A4 Installed $1995, includes fluids, freight and no core charge. LSx F-Body
Add for upgrade to Level V Trans $400
Add for B&M Trans Cooler Installed $95
Textralia OZ700 Clutch & Steel Flywheel Installed $1449
Includes Charlie@RPM bleeder hose, new GM slave cylinder.
Add for new GM clutch master cylinder (highly recommended) $249
Textralia Exo Skel Twin Disk Clutch & Flywheel Installed $1695
Includes Charlie@RPM bleeder hose, new GM slave cylinder.
Add for new GM clutch master cylinder (highly recommended) $249
Here is a nice cam swap parts package for the DIY’er
Base Camshaft Parts Package $979 plus shipping
Includes:
Choice of any 54-000-11 series Comp Cam either shelf or custom ground.
Crane 144832 dual springs, titanium retainers and valve spring seats.
Comp valve stem seals.
Comp 7.400” moly pushrods.
GM timing cover gasket.
GM timing cover seal.
GM water pump gaskets (2).
GM cranks bolt.
Stage 2 Camshaft Parts Package $1368 plus shipping
Base Camshaft Parts Package Plus:
Powerbond 25% Underdrive Pulley and Gates Belt
GM LS2 Timing Chain
GM LS2 Oil Pump & O-ring.
160* Thermostat.
I am also working on a couple cam install and tuning prices along with some forced induction pricing. Please feel free to PM, e-mail me or call and I can work you a good deal on just about anything from small parts to supercharger kits, rear end assemblies and long blocks. Not giving it away or guarantee price matching as I still have overhead and such, just wanted to show how much the past business is appreciated and pass along some savings to everyone.
Thanks again for all the support, past, present and future and look forward to seeing everyone on Sept 29th.
Mike Norris
I am finally up and operational and I just wanted to invite folks to the new location on Saturday, Sept 29th for a get together for some burgers, dogs, snack and drinks (sorry no alcohol) for friends, clients and enthusiasts alike. The dyno will be running, but on a limited basis so I can spend some time with everyone. Hopefully the end of September will bring some pleasant weather for us.
During the day the dyno will be available for $25 for 2-3 pulls. There will also be an hourly drawing for a free on the spot set of base dyno runs. If your name is pulled and you are not there, that ticket will go back in so you have another chance and another ticket will be pulled.
There will also be another drawing at the end of the day for a free full chassis dyno tune. You do not have to be present to win, just have to be there at some time during the day.
I am figuring on officially starting at 10AM, but can start earlier if folks would prefer. Just feel free to let me know. As long as folks are around we can go till sundown if you would like. Or we can set up a cruise and hit a night spot later on.
Here is a Google map for everyone:
http://maps.google.com/maps?q=101+1s...i=map&ct=title
As most may have noticed from my previous posts, I am at this time not getting into engine builds, trans disassembly or rear end disassembly. The owner of the property prefers to keep as clean as possible from an environmental point of view and wants no oil stored on site or potential large messes. What I can handle any bolts on packages from cold air intakes, to header to superchargers as well as complete trans assemblies, clutches, converters, rear end assemblies, suspension, brakes and of course tuning. I will also be offering excellent pricing on parts and parts packages for everyone.
As I mentioned before there will be several Retro Priced Specials going on to again show my appreciation over the past 8 ½ years. Basically going back to 1999 pricing on a lot of items and even lower. Here is a sampling for you all and this is starting as of this posting. This pricing starts today and we can schedule you in as early as next week depending on what you need to have done.
LSx F-Body American Racing Headers Installed Package $1979
Includes before dyno, 1 3/4” or 1 7/8” primaries, high flow cats, oxygen sensor extensions, 160* thermostat, GM exhaust gaskets, Stage 8 locking header bolts, NGK TR55 spark plugs and a full in house chassis dyno tune. For those wanting to eliminate or change some items the pricing can be adjusted accordingly.
LSx F-Body Dynatech Supermaxx Headers Installed Package $2179
Includes before dyno, 1 3/4” primaries, high flow cats, oxygen sensor extensions, 160* thermostat, GM exhaust gaskets, Stage 8 locking header bolts, NGK TR55 spark plugs and a full in house chassis dyno tune. For those wanting to eliminate or change some items the pricing can be adjusted accordingly.
LSx Tuning Pricing
Naturally Aspirated $350 Group of 3 or more in a day $300 each
Forced Induction or Nitrous $400 Group of 3 or more in a day $350 each
Basic Simple Changes $95 Group of 3 or more in a day $75 each
RPM Transmissions Level IV M6 Installed $1895, includes fluids, freight and no core charge. LSx F-Body
Add for upgrade to Level V Trans $400
Add for Charlie@RPM clutch bleed line $89
RPM Transmissions Level IV A4 Installed $1995, includes fluids, freight and no core charge. LSx F-Body
Add for upgrade to Level V Trans $400
Add for B&M Trans Cooler Installed $95
Textralia OZ700 Clutch & Steel Flywheel Installed $1449
Includes Charlie@RPM bleeder hose, new GM slave cylinder.
Add for new GM clutch master cylinder (highly recommended) $249
Textralia Exo Skel Twin Disk Clutch & Flywheel Installed $1695
Includes Charlie@RPM bleeder hose, new GM slave cylinder.
Add for new GM clutch master cylinder (highly recommended) $249
Here is a nice cam swap parts package for the DIY’er
Base Camshaft Parts Package $979 plus shipping
Includes:
Choice of any 54-000-11 series Comp Cam either shelf or custom ground.
Crane 144832 dual springs, titanium retainers and valve spring seats.
Comp valve stem seals.
Comp 7.400” moly pushrods.
GM timing cover gasket.
GM timing cover seal.
GM water pump gaskets (2).
GM cranks bolt.
Stage 2 Camshaft Parts Package $1368 plus shipping
Base Camshaft Parts Package Plus:
Powerbond 25% Underdrive Pulley and Gates Belt
GM LS2 Timing Chain
GM LS2 Oil Pump & O-ring.
160* Thermostat.
I am also working on a couple cam install and tuning prices along with some forced induction pricing. Please feel free to PM, e-mail me or call and I can work you a good deal on just about anything from small parts to supercharger kits, rear end assemblies and long blocks. Not giving it away or guarantee price matching as I still have overhead and such, just wanted to show how much the past business is appreciated and pass along some savings to everyone.
Thanks again for all the support, past, present and future and look forward to seeing everyone on Sept 29th.
Mike Norris
09-01-2007, 08:25 AM
#7
Hey Richie,
You still need to get the wifes car in? Just let me know and see you on the 29th.
Thanks to everyone and the $350 NA tune pricing is the normal everyday price for now. Feel free to call me to make an appointment for sure.
Mike Norris
You still need to get the wifes car in? Just let me know and see you on the 29th.
Thanks to everyone and the $350 NA tune pricing is the normal everyday price for now. Feel free to call me to make an appointment for sure.
Mike Norris
Trending Topics
09-01-2007, 01:08 PM
#9
Originally Posted by Mike Norris
Hey Richie,
You still need to get the wifes car in? Just let me know and see you on the 29th.
Thanks to everyone and the $350 NA tune pricing is the normal everyday price for now. Feel free to call me to make an appointment for sure.
Mike Norris
You still need to get the wifes car in? Just let me know and see you on the 29th.
Thanks to everyone and the $350 NA tune pricing is the normal everyday price for now. Feel free to call me to make an appointment for sure.
Mike Norris
I'll call you on Tuesday to set up a time.
Have a good weekend,
09-02-2007, 08:18 AM
#11
I forgot to mention that the dyno runs, besides the ones in the drawing, will be on a first come fiirst served basis and limited to the first 12 people signing up. We can always schedule a full on dyno day down the road a bit and the weather should be even cooler then, hopefully.
Richie, just give me a call and I will get you in.
Jeff, I am working on some there also. I will let you know.
Thanks agian folks.
Mike Norris
Richie, just give me a call and I will get you in.
Jeff, I am working on some there also. I will let you know.
Thanks agian folks.
Mike Norris
09-02-2007, 11:03 AM
#12
TECH Junkie
iTrader: (13)
Join Date: Sep 2004
Location: Fort Myers, FL.
Posts: 3,857
Likes: 0
Received 0 Likes
on
0 Posts
hey mike need help strapping cars down. haha. Hope all goes well on the opening day.
I know Roy and I are going to be racing at Bradenton that day so we will see if we can get over.
I know Roy and I are going to be racing at Bradenton that day so we will see if we can get over.
09-04-2007, 05:01 AM
#18
I stopped by the shop yesterday to chat with mike and have some lunch and it is actually a great location and very very nice. I look forward to seeing some badass rides there soon.
Carbone, I'm up for seeing how hard you can get hit and keep moving forward. I expect I hit you 3 times and you start screaming ADRIAN , YO ADRIAN The dental magician just hit me, I closed my eyes for 1 second and he knocked all my teeth out.
Carbone, I'm up for seeing how hard you can get hit and keep moving forward. I expect I hit you 3 times and you start screaming ADRIAN , YO ADRIAN The dental magician just hit me, I closed my eyes for 1 second and he knocked all my teeth out.
09-04-2007, 09:32 AM
#20
Originally Posted by jason99frc
Carbone, I'm up for seeing how hard you can get hit and keep moving forward. I expect I hit you 3 times and you start screaming ADRIAN , YO ADRIAN The dental magician just hit me, I closed my eyes for 1 second and he knocked all my teeth out.
We'll see who the real dental magician is.