BS3 guys, where'd you mount your ECU? Pics?
#3
TECH Veteran
Thread Starter
iTrader: (53)
Join Date: Feb 2004
Location: Monticello, Kentucky
Posts: 4,433
Likes: 0
Received 0 Likes
on
0 Posts
I have a nice little void where the air bag used to be. I wondered if I had enough harness to mount it along the tunnel on the passenger side (below the radio/heater controls).
#4
TECH Senior Member
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
Behind the glovebox on my AC evaporator blockoff plate.
harness length is fine...just make sure you put it thru the firewall where it'll reach everything...some of the connectors are short...
harness length is fine...just make sure you put it thru the firewall where it'll reach everything...some of the connectors are short...
#7
TECH Veteran
Thread Starter
iTrader: (53)
Join Date: Feb 2004
Location: Monticello, Kentucky
Posts: 4,433
Likes: 0
Received 0 Likes
on
0 Posts
OK new question, what about the factory harness hole? It looks like it's gonna be too small for that big *** grommet. Kinda hard to get to the hole to waller it out.
Trending Topics
#10
TT-TECH Veteran
iTrader: (29)
I used the factory hole I used a die grinder to make it larger and the gromet that came with the BS3 fit perfect it's tight getting the PCM plugs thought there, but I got it LOL! Also I had to move the gromet on the harness to get it to run like I wanted etc...And it fits right behind the kick panel also.