IT_SS

iTrader: (5)

If you have one and you want to get rid of it let me know.

Brigger18

iTrader: (20)

You asking for a stock cam?

NightHawk

iTrader: (1)

Good luck man, I gave up on looking for one. Seems like everyone who has a decent used one wants an arm and a leg for it.

hatcher1986

iTrader: (4)

i have one sitting in my shop. PM me if ur intrested

grpaic

is the cam for a supercharged motor? if it is i have a 228-234- 588-598 LSA115 very good manner street cam that was making 760 rwhp in a vette

mikep2002

iTrader: (10)

Did you try posting on corvetteforum... I believe they are a dime a dozen overthere.

eviltwin_1987

iTrader: (18)

X2 I've gotten three from there and never paid over $100

AES Racing

iTrader: (6)

I was talking to Dan Crower, not only does he grind cams at Crower, he can regrind stock LS cams, hes done a few of then, comes out to 212/218 .525/.525 115 LSA, If I recall. The base circle becomes .050" smaller. The induction hardening used on stock cams deeper then case hardening used on SADI cores most aftermarket cams are made from.

Don't wanna quote price but he charges around what a used LS6 cam would sell for.

IT_SS

iTrader: (5)

pm sent


everyone else thanks for the insight. Last time i tried to get one I got scammed....

Big_Bird_WS6

iTrader: (7)

i have a LS2 cam. SAME cam. you just need front Cam sensor.

LS2 cam and springs
150 plus ship

Gonoma

iTrader: (15)

not the same as an 02-04. Its the same as the 01 zo6 cam but that is it.

IT_SS

iTrader: (5)

Just an FYI, I scored on 'Vette Forums for 40 shipped, and theres a few other folks who have them for sale.

If you not sure if yours is a 02-04 Z06 Cam, this is the factory stamp on the front;

5308
S 09
1236

Its the actual GM Part # (12365308) backwards

evo462

iTrader: (27)

Dang, wish I would have known about that. I think I paid $125-150 shipped for mine

Went and checked mine -

5308
s13
1270

Did I get duped?

IT_SS

iTrader: (5)

no, the 5308 is the key, its the last 4 of the GM pn, you may want to google 12705308 just to be sure

stevieturbo

Why not just buy an LS9 cam ?

Bdiddy

iTrader: (5)

I have been on the search for the 5308 as well. They seem to disappear quickly. Seems like a decent cheap upgrade for a mostly stock street lq4.

S1LV3R

iTrader: (5)

You woke up an old thread! Take a look below. There is a good comparison of stock cams.

http://www.hotrod.com/how-to/engine/...st-comparison/

Bdiddy

iTrader: (5)

Great link. Lots of good info there. Thanks

Bdiddy

iTrader: (5)

If anyone has a good 5308 cam and springs and pushrods I'm looking for this stuff. I will put a parts wanted post up as well. Thanks

forcd ind

iTrader: (7)

I have one of the Z06 ones, but I had it in a box and it got a couple minor rust dots on it-I lightly burnished it, figured I could use it in a junk build
Fig I couldn't sell it like that, not sure if it would be ok or not