holley High ram or victor with elbow?
#1
Launching!
Thread Starter
iTrader: (7)
Join Date: Feb 2005
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
holley High ram or victor with elbow?
6 Liter .GT91 turbo. Big turbo cam. 317 heads 160lb. Injectors. Glide. . Im trying to figure out what intake setup to run?? Fast? Victor jr? Victor sr. Holley high ram or? this is a max effort setup. Thanks
Trending Topics
#10
LS1Tech Sponsor
iTrader: (16)
http://shop.brutespeed.com/Intake-Manifold_c335.htm
I sell the Edelbrock and the Holly intakes at the above link. Let me know if you have any questions. Bob
I sell the Edelbrock and the Holly intakes at the above link. Let me know if you have any questions. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#11
After talking with Kurt Urban with the same question about intakes, I now have a Super Vic with elbow. He also said the ProFlo was nice but that HE had issues with the High Ram.
That was enough for me!
Btw, 6l here also going for max effort with stock block, crank, and 317s to see what we get! Oh, most importantly a S500-88 will be testing the limits of these parts.
That was enough for me!
Btw, 6l here also going for max effort with stock block, crank, and 317s to see what we get! Oh, most importantly a S500-88 will be testing the limits of these parts.
#15
TECH Addict
iTrader: (6)
I was under the impression that the shops that saw issues with the Hi-Ram never experienced any issues with the cathedral port intakes, only the square port. I have been wrong before....but I can tell you I compared my hi-ram to the factory intake and the injectors sat almost exactly the same position and depth as far as I could tell.