Procharger pulley = ? boost
#1
TECH Enthusiast
Thread Starter
Join Date: Dec 2004
Location: Zanesfield, OH
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
Procharger pulley = ? boost
I know it is complicated to figure out but I would like to know how much boost you guys think this will make. I have Kooks long tubes 1 7/8", EPS cam 226/234 .598/.612 114LSA, stock heads, stock intake, and corsa catback.
Its a D1SC 8 rib, procharger spec'ed a 4.38" blower pulley. I requested to between 8-9psi range.
What do you guys think will I be close. Some delays in the dyno session it wont hit the rollers until Tuesday now. The tuner thinks it might be a bit large I guess we will find out for sure soon. Interested in your opinions.
Its a D1SC 8 rib, procharger spec'ed a 4.38" blower pulley. I requested to between 8-9psi range.
What do you guys think will I be close. Some delays in the dyno session it wont hit the rollers until Tuesday now. The tuner thinks it might be a bit large I guess we will find out for sure soon. Interested in your opinions.
#3
TECH Enthusiast
Thread Starter
Join Date: Dec 2004
Location: Zanesfield, OH
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
That sucks, I hope procharger did their math right. I don't have a lot of time before the build needs completed. I plan on meeting some friends on power tour.
Anyone else have an opinion or experiance with a similar set up?
Anyone else have an opinion or experiance with a similar set up?
#4
11 Second Club
iTrader: (1)
Join Date: Mar 2010
Location: Mooresville NC
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
I know it is complicated to figure out but I would like to know how much boost you guys think this will make. I have Kooks long tubes 1 7/8", EPS cam 226/234 .598/.612 114LSA, stock heads, stock intake, and corsa catback.
Its a D1SC 8 rib, procharger spec'ed a 4.38" blower pulley. I requested to between 8-9psi range.
What do you guys think will I be close. Some delays in the dyno session it wont hit the rollers until Tuesday now. The tuner thinks it might be a bit large I guess we will find out for sure soon. Interested in your opinions.
Its a D1SC 8 rib, procharger spec'ed a 4.38" blower pulley. I requested to between 8-9psi range.
What do you guys think will I be close. Some delays in the dyno session it wont hit the rollers until Tuesday now. The tuner thinks it might be a bit large I guess we will find out for sure soon. Interested in your opinions.
Trending Topics
#8
TECH Enthusiast
Thread Starter
Join Date: Dec 2004
Location: Zanesfield, OH
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
Well my pulley is larger so it will spin the head unit slower. Your pulley was the next size smaller compared to mine. I hope that gets it down to about 9psi, I dont want my stock engine to RIP to quickly. I am assuming yours didn't like the 13psi so well so it is now dead!
#10
11 Second Club
iTrader: (1)
Join Date: Mar 2010
Location: Mooresville NC
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Well my pulley is larger so it will spin the head unit slower. Your pulley was the next size smaller compared to mine. I hope that gets it down to about 9psi, I dont want my stock engine to RIP to quickly. I am assuming yours didn't like the 13psi so well so it is now dead!