Got in the Steel ATI bracket
#1
TECH Fanatic
Thread Starter
Join Date: Dec 2001
Location: Germantown, MD
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
Got in the Steel ATI bracket
Got a nice present on my front door step today. Jason sent me one of his custom machined steel ATI brackets. My first impression is it is one hell of a piece. Just holding this bracket I can tell where the other one might flex. VERY sturdy! I'm still waiting on a few more parts to come in before mounting it, but I'm very pleased with what I was sent and hopefully will ward off any flexing issues before they become a problem for me.
Jason told me he was going to cook up another batch of these sometime soon, so if you're interested don't worry he isn't sold out. I'll report back when I actually get her on there.
Mike B.
Jason told me he was going to cook up another batch of these sometime soon, so if you're interested don't worry he isn't sold out. I'll report back when I actually get her on there.
Mike B.
#2
TECH Senior Member
iTrader: (16)
Originally Posted by buschman
Got a nice present on my front door step today. Jason sent me one of his custom machined steel ATI brackets. My first impression is it is one hell of a piece. Just holding this bracket I can tell where the other one might flex. VERY sturdy! I'm still waiting on a few more parts to come in before mounting it, but I'm very pleased with what I was sent and hopefully will ward off any flexing issues before they become a problem for me.
Jason told me he was going to cook up another batch of these sometime soon, so if you're interested don't worry he isn't sold out. I'll report back when I actually get her on there.
Mike B.
Jason told me he was going to cook up another batch of these sometime soon, so if you're interested don't worry he isn't sold out. I'll report back when I actually get her on there.
Mike B.
J
#5
TECH Fanatic
Thread Starter
Join Date: Dec 2001
Location: Germantown, MD
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
PSJ, I believe $175.
Hey NBM, did your bracket come inside a fedex box inside a larger brown box? if so Jason told me that mine, and perhaps yours were sent out in a FEDEX air box with a ground shipping label. They had to be sent back and repackaged. that's why they took longer than usual to get to us. If that wasn't the case for you then forget this message
Mike
Hey NBM, did your bracket come inside a fedex box inside a larger brown box? if so Jason told me that mine, and perhaps yours were sent out in a FEDEX air box with a ground shipping label. They had to be sent back and repackaged. that's why they took longer than usual to get to us. If that wasn't the case for you then forget this message
Mike
#6
Moderator
$180.00
I went from intermittent boost-dives hovering around 8 to 11 PSI to 13 or 14 PSI solid, with no other changes other than this bracket.
I have not had to replace any belts since then, either. This belt is in such good shape, I'd reuse it, if it weren't for the fact I took it and the 6-rib pulley off to put on my new ATI 8-rib, the Superdamper and to pin the crank.
Guys, if you are an ATI Procharged car with the aluminum bracket and running big boost, I can't overstate the value of this piece!
I went from intermittent boost-dives hovering around 8 to 11 PSI to 13 or 14 PSI solid, with no other changes other than this bracket.
I have not had to replace any belts since then, either. This belt is in such good shape, I'd reuse it, if it weren't for the fact I took it and the 6-rib pulley off to put on my new ATI 8-rib, the Superdamper and to pin the crank.
Guys, if you are an ATI Procharged car with the aluminum bracket and running big boost, I can't overstate the value of this piece!
Trending Topics
#9
Moderator
Originally Posted by NA$TY-TA
Whats his contact info again...... im going to need one of these......... was that $180 shipped?
Thanks
Kyle
Thanks
Kyle
Jason Escher
303-670-5011
As I recall, that was the price of the part... helluva deal, since the other bracket, mass-produced, costs at LEAST that much.
#11
TECH Enthusiast
iTrader: (4)
Join Date: Nov 2001
Location: Englewood, Ohio
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by buschman
PSJ, I believe $175.
Hey NBM, did your bracket come inside a fedex box inside a larger brown box? if so Jason told me that mine, and perhaps yours were sent out in a FEDEX air box with a ground shipping label. They had to be sent back and repackaged. that's why they took longer than usual to get to us. If that wasn't the case for you then forget this message
Mike
Hey NBM, did your bracket come inside a fedex box inside a larger brown box? if so Jason told me that mine, and perhaps yours were sent out in a FEDEX air box with a ground shipping label. They had to be sent back and repackaged. that's why they took longer than usual to get to us. If that wasn't the case for you then forget this message
Mike
That's the same way mine was shipped. Heck I ordered it on Feb 2nd and just got it.
#12
Moderator
I got mine the same week he verified it was made.
But, I think he keeps them in stock, now, once he heard guys say they are interested. I think that is pretty cool (and risky) of him, since interest from a limited community as this one could wane at any time.
But, I think he keeps them in stock, now, once he heard guys say they are interested. I think that is pretty cool (and risky) of him, since interest from a limited community as this one could wane at any time.
#13
TECH Fanatic
Thread Starter
Join Date: Dec 2001
Location: Germantown, MD
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
Oh I'm not knocking Jason. I think this was an honest mistake. But I ordered mine slightly after NBM and like him just got it. I think this was one of those rare instances where it actually was a problem with shipping and not a dishonest seller. It's just Jason told me that he sent mine out with another and they were both sent back. Since NBM just got his I figured it might have been him. Small world
Mike
Mike
#15
Moderator
Pics!
PICS!
ATI install view:
Steel and Alum bracket, side-by-side... see gouging in Alum from idler pulley:
Closer look at the gouging (you high boost boys better check this!):
Front of new Steel bracket, painted:
ATI install view:
Steel and Alum bracket, side-by-side... see gouging in Alum from idler pulley:
Closer look at the gouging (you high boost boys better check this!):
Front of new Steel bracket, painted:
#19
Hey guys,
just wanted to let every one know I've got 4 left. Good chance I won't run more until June-July. Reason being I am used up all my material and really don't want to buy any more for inventory purposes for a while. We are getting ready to dive into some more development work for the next month or so and most of my extra funds will be tied up in that.
Here's something you guys might get a kick out of though....
'00 Wrangler 4.0 ltr. stock HP is 190 and 235 Tq.
8#'s intercooled ATI (we made all the brackets, tubing, drive and fuel systems) 325 HP and 400 Tq
Pretty cool and hell of alot of fun to drive.
www.automotionperformance.com/00-04wrangler.html
Thanks again
and if anyone has this brkt. running on their car and would like to give any positive or negative feed back PLEASE do so. We're always trying to make a better product.
Jason Esher
Automotion Performance, Inc.
303-670-5011
just wanted to let every one know I've got 4 left. Good chance I won't run more until June-July. Reason being I am used up all my material and really don't want to buy any more for inventory purposes for a while. We are getting ready to dive into some more development work for the next month or so and most of my extra funds will be tied up in that.
Here's something you guys might get a kick out of though....
'00 Wrangler 4.0 ltr. stock HP is 190 and 235 Tq.
8#'s intercooled ATI (we made all the brackets, tubing, drive and fuel systems) 325 HP and 400 Tq
Pretty cool and hell of alot of fun to drive.
www.automotionperformance.com/00-04wrangler.html
Thanks again
and if anyone has this brkt. running on their car and would like to give any positive or negative feed back PLEASE do so. We're always trying to make a better product.
Jason Esher
Automotion Performance, Inc.
303-670-5011