Turbo Guys let's talk motor mounts!!!!
#1
12 Second Club
Thread Starter
iTrader: (14)
Join Date: Aug 2008
Location: NWI
Posts: 1,264
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Guys let's talk motor mounts!!!!
Ok guys have a quick question, what mounts do you have on your car and tell me why.. I have a stock k member, and I was looking at the umi soild motor mounts.. A little about my car
LS2
Th400
Kytp hot side pt76
I want to run my down pipe thought the bumper or pass fender.. So let me no what's the best choice. I tryed searching but came up with nothing.. Thanks Andrew
LS2
Th400
Kytp hot side pt76
I want to run my down pipe thought the bumper or pass fender.. So let me no what's the best choice. I tryed searching but came up with nothing.. Thanks Andrew
#2
TECH Resident
iTrader: (17)
Join Date: Sep 2009
Location: Orlando Fl.
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
If your downpipe is going thru the bumper then there's really no need for new mounts.....
Im running the Spohn solids (stock k-member) only because it gives me a little more room if i ever did decide to put a full exhaust on the car.....
Im running the Spohn solids (stock k-member) only because it gives me a little more room if i ever did decide to put a full exhaust on the car.....
#3
12 Second Club
Thread Starter
iTrader: (14)
Join Date: Aug 2008
Location: NWI
Posts: 1,264
Likes: 0
Received 0 Likes
on
0 Posts
P.s sorry for the messy post
#6
TECH Fanatic
iTrader: (5)
Join Date: Sep 2008
Location: Salem/Keizer
Posts: 1,120
Likes: 0
Received 0 Likes
on
0 Posts
BMR Turbo k-member here with poly mounts. Nice thing about the poly mounts is that they never deteriorate....as long as you don't cook them from being too close to the turbo downpipe. Usually not an issue.
Trending Topics
#12
Restricted User
iTrader: (17)
I am using stock manifolds and my downpipe is not all that close to anything under there and my poly motor mounts melted like they were made of wax on both sides. I bought these from UMI and no problem since. No noticeable change in ride quality or vibration.
I still have the poly cross member mount.
I still have the poly cross member mount.