One Guy's Garage 71 Nova TT 5.3, The Quest for 7's.
#66
Front is stock sub, Afco adjustable spring buckets and 650lb springs, 2" drop spindles (the ones with bolt on steering arms), Chevelle steering arms mounted backwards, inner tie rod mounts relocated 2 inches upward (cheap way of Ridetech's Truturn), SC&C Xtra tall upper ball joints, SPC upper arms, stock lowers. The thing handles great but I need a set of Corbeau seats pronto.
Front and rear shocks are Bilsteins revalved by Race Car Dynamics.
#68
10 Second Club
iTrader: (13)
Join Date: Feb 2006
Location: MOREHEAD KY
Posts: 3,297
Likes: 0
Received 0 Likes
on
0 Posts
It was nice to talk to you as well.
The rear is caltrac split mono's with a 3" drop, relocated shocks on a crossmember.
Front is stock sub, Afco adjustable spring buckets and 650lb springs, 2" drop spindles (the ones with bolt on steering arms), Chevelle steering arms mounted backwards, inner tie rod mounts relocated 2 inches upward (cheap way of Ridetech's Truturn), SC&C Xtra tall upper ball joints, SPC upper arms, stock lowers. The thing handles great but I need a set of Corbeau seats pronto.
Front and rear shocks are Bilsteins revalved by Race Car Dynamics.
The rear is caltrac split mono's with a 3" drop, relocated shocks on a crossmember.
Front is stock sub, Afco adjustable spring buckets and 650lb springs, 2" drop spindles (the ones with bolt on steering arms), Chevelle steering arms mounted backwards, inner tie rod mounts relocated 2 inches upward (cheap way of Ridetech's Truturn), SC&C Xtra tall upper ball joints, SPC upper arms, stock lowers. The thing handles great but I need a set of Corbeau seats pronto.
Front and rear shocks are Bilsteins revalved by Race Car Dynamics.
#69
TECH Fanatic
iTrader: (4)
Join Date: Dec 2009
Location: Charleston, SC
Posts: 1,497
Likes: 0
Received 0 Likes
on
0 Posts
How far do honestly feel the small bore aluminum can go? Would 900-1000Hp wheel be asking for trouble? Any reason you didn't bore it out to 3.9x?
I ask because I have a l33 bare block, just trying to decide what I want to do with it.
Thanks bud.
I ask because I have a l33 bare block, just trying to decide what I want to do with it.
Thanks bud.
#70
I dont see any issues going to 1000rwhp. However your going to need a monster turbo to push that much airflow at the expense of spooling and street manners. The liners are really thick in the L33 so I wanted to keep that so I didnt bore it any bigger. Mine's a street car that also will see some road course and auto x duty so a bigger turbo was out of the question.
#73
TECH Fanatic
iTrader: (23)
Sorry, I should have edited my post I read that on the 1st page, thanks
I have the option to buy a iron 6.0 with a 80 complete, they say its locked up, then the other guy says its not, have to see, but either way its a good deal, what crossmember did you mod, where your first build thread?? thansk man!!
I have the option to buy a iron 6.0 with a 80 complete, they say its locked up, then the other guy says its not, have to see, but either way its a good deal, what crossmember did you mod, where your first build thread?? thansk man!!
#74
Teching In
Join Date: Oct 2010
Location: Mooresville, NC
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
How did you come up with the 2" raise? Is that what the Ridetech piece is?
Great project btw
#80
11 Second Club
iTrader: (8)
Join Date: Jan 2010
Location: Southern Idaho
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
Awesome build man, I love how clean and simple you kept everything, looks great! Congrats on the 9 second pass too. What psi were you running on the last dragstrip outing? Any chance you would post a slip or at least the 60ft?