Superman09

iTrader: (65)

1998-2002 LS1 F-body A/C Retaining Single Turbo Kit LS1Tech *Group Purchase*
Group Purchase Open from NOW – March 24, 2013 or until 20 spots fill. Group Purchase Kits will be delivered BEFORE May 31, 2013

ONLY 20 slots available, so don’t wait and miss out!

Click Here to Place Your Deposit!

***Kit has many of the same features as the already successful kit Truck Manifold kit, however obviously retaining A/C with the use of a C6 manifold and a truck manifold combination fitting through a Turbo K-member. Kit will require the use of a Turbo K-member (was built around a PA Racing Super Turbo K-member) This can be purchased with your kit for a great price, or separately.


The Group Purchase Details:
This item is a deposit to get in on the LS1Tech.com A/C Kit *Group Purchase*

To get in on the Group Purchase, you must place your deposit BEFORE March 24, 2013 AND/OR before it fills up at 20 people. The Group Purchase will be closed at this time!

Remaining cost of the Turbo Kit will be due when the kits are all completed and ready to ship out, no sooner.

This purchase is for a $500 Non-Refundable Deposit to hold your place in the Group Purchase put towards the price of the Turbo Kit. This deposit is not refundable or exchangeable for any reason unless your Turbo Kit is not ready to ship to you by May 31, 2013. If it is not ready at this time to submit your final payment and have your kit shipped, you are entitled to a full refund of your Deposit if you choose. No other reason is the deposit refundable.

The latest date to submit your Final Payment will be June 14, 2013. If the turbo kits are ready to ship before this date, you will be contacted as soon as it is ready and will have from that time until June 14, 2013 to submit your final payment. If kit is complete and payment is not made in full by June 14, 2013, you forfeit your Deposit.

By Purchasing this $500 Deposit to the Group Purchase, you are agreeing to the terms and conditions above.

Click Here to Place Your Deposit!



Final Pricing for the Group Purchase:

*All Pricing below INCLUDES *FREE* Shipping to the lower 48 states!*

1-5 People = $2499 TOTAL, $1999 due when kit is ready to ship.
**First 5 people receive a FREE 50mm BOV and a $50 credit towards a K-member purchase off the ALREADY discounted price!**

6-10 People = $2449 TOTAL, $1949 due when kit is ready to ship.
**6-10 people will receive a FREE 50mm BOV**

11-15 People = $2399 TOTAL, $1899 due when kit is ready to ship.

16-20 People = $2299 TOTAL, $1799 due when kit is ready to ship.

**Standard pricing on the kit is set at $2750**



Includes:

-2-piece hotside in 2.5” piping w/ T4 flange and 44mm Wastegate Flange

-2.5” V-band clamp for easy connection of 2 hotside pipes.

-3” 1-piece Downpipe

-3" Cold side piping from turbo to FMIC to Throttle Body

-MAF Delete pipe

-50mm Blow-Off Valve Flange on Cold side piping

-4" core front mount Intercooler

-All exact, specific couplers

-Extra exact couplers to run or not run the MAF Delete

-All exact, specific T-Bolt clamps

-F-body front mount intercoolers brackets

-F-body alternator & tensioner relocation brackets

-Hardware to mount Turbo, intercooler brackets, intercooler, alternator & tensioner relocation to vehicle




All piping made from 321 stainless steel, fully polished.

Advantage of using factory GM manifolds, no fear of aftermarket headers or manifolds cracking due to the turbo weight!

Advantage of having the Huron Speed customer service!

Requires Turbo, Wastegate, BOV, Oil Lines, Pusher Fans, Misc Hardware, passenger side Truck Manifold to use on drivers side, and a passenger side C6 Manifold to run on the passenger side to complete

Kit requires a Turbo K-member (built around the PA Racing Super Turbo K-member) and lowering or removal of front sway bar







Click Here to Place Your Deposit!



We are capping this Group Purchase at 20 people, and adding in an incentive to get in early… first 1-5 people receive a FREE 50mm BOV and $50 credit towards a PA Racing K-member. Those in slots 6-10 receive a FREE 50mm BOV!

1.) GoodSpeed150 **Free 50mm BOV & $50 K-member Credit
2.) 99ws6_ **Free 50mm BOV & $50 K-member Credit
3.) Subarubill96 **Free 50mm BOV & $50 K-member Credit
4.) Anonymous **Free 50mm BOV & $50 K-member Credit
5.) SSJoe15**Free 50mm BOV & $50 K-member Credit
6.) **Free 50mm BOV**
7.) **Free 50mm BOV**
8.) **Free 50mm BOV**
9.) **Free 50mm BOV**
10.) **Free 50mm BOV**
11.)
12.)
13.)
14.)
15.)
16.)
17.)
18.)
19.)
20.) CAPPED (LAST Spot Avail.)





***Already have a Huron Speed Single Turbo Truck Manifold kit and are interested in this A/C retaining kit? No worries, we have your covered! Also available will be our A/C Retaining Upgrade kit for all Truck Manifold kit owners! Included will be the following:

-2-piece hotside in 2.5” piping w/ T4 flange and 44mm Wastegate Flange

-2.5” V-band clamp for easy connection of 2 hotside pipes.

-3” 1-piece Downpipe

-Instructions on how to shorten one cold side pipe

This upgrade kit will convert your Truck Manifold kit over to our A/C Retaining kit so you can get the A/C back on your vehicle! We will also allow an exchange program to help keep your costs down as well!

Price for the upgrade kit (Available ONLY to customers who purchased a Truck Manifold kit through Huron Speed)

-$1199 outright
-$899 with exchange of your used Truck Manifold Crossover Pipe and Downpipe
-$599 with exchange of your NEW Truck Manifold Crossover Pipe and Downpipe


If interested in this A/C upgrade kit, send me a PM for more information!!!!

Huron Speed

bozzhawg

Looks nice

Superman09

iTrader: (65)

Thanks!

BlackBirdDaddy

iTrader: (16)

This is a fantastic A/C turbo kit as I absolutely had no problems with the install. Also, the support from Huron Speed through this whole process was fantastic!





I have been known to be rather "picky" with what I install on my ride and let me tell you, these are very high quality parts that look fantastic!!


Now, I'm itchin' to get this thing on the road after the snow disappears!










Here is a pic with the filter installed

67Firebird455

iTrader: (27)

Beautiful looking kit. Great price too, especially with 20 people!

LSxWittles

Hmm, looks like I will be doing the AC upgrade as soon as I get my truck manifold kit lol. Damn good looking work as usual Huron!

Superman09

iTrader: (65)

Thanks!

Appreciate it! Sounds like a plan as well!

1999Black_Z28

iTrader: (1)

Love it! Can't believe it's not sold out yet!

Superman09

iTrader: (65)

haha, thanks Dave!

GoodSpeed150

iTrader: (7)

Payment sent! Can't wait to get it haha!

gjohnsonws6

iTrader: (12)

Kit contents made in USA?

Superman09

iTrader: (65)

Kits are all designed and fabricated in house. Mass production kits are sent to XSPower who has the piping done overseas (we can also do in-house for anything and everything if anyone is interested!) however this keeps the cost down for production kits. Many other components in the kit are sourced from USA companies.
We also fabricate and build one-off kits in house (all USA ) We can make / build / fabricate ANYTHING you can want right here in house for anyone interested!

We can custom build one-off turbo kits on our running and complete Huron Speed Trans Am from mild to wild, a direct replication of any of our production kits if you prefer to have it hand crafted by us even - we currently have 5 T6 F-body kits under construction at the moment. These kits will be done all in house and not in production.



4" inlet / outlet Intercooler





Anyone interested in a full one-off custom built kit, PM me or e-mail direct to huronspeedproducts@gmail.com

Superman09

iTrader: (65)

Will get the bundle components going ASAP for you. Thanks, you will really like this kit!

Superman09

iTrader: (65)

Also, adding on the K-member or a Bundle pack is NOT required at all, just there to help out those buying to save a little bit. All that is needed to get this kit is the $500 deposit and then the remaining balance based off how many people get in once the kit is ready to ship!!!

Only $500 now to get it!

Jon

2000camaroSS2000

Will a t4 pt88 fit with this kit?

Superman09

iTrader: (65)

A pt88 has a 4" downpipe exit so the downpipe would not bolt up without modifying it. Also space to the radiator would be tight as the pt88 is a mid frame and physically larger. You woul have to move the radiator and ac condensor forward a bit. It could be done but it was not designed for it.

Good power making turbos that would be a direct bolt up would be:
Turbonetics t series 7675 or 7875
Precision 7675 (76 gts)
Comp 7679 or 7879


Jon

Superman09

iTrader: (65)

2 spots already filled! Don't wait around too long and miss out on the free turbo goodies!

BlackBirdDaddy

iTrader: (16)

Now is the time to hook yourself up with one these kits before the driving season.

Superman09

iTrader: (65)

Thanks Jim!

Capricio

Props to Jon for taking the time to give a very well considered response to all my questions today. Haven't bought anything yet, but I didn't have to chase them down or beg for info like some other shops I tried. Looks like a great product at an affordable price.