SPRAYED Z

iTrader: (4)

Anybody using a pt88 turbo or comparable with a 4" down pipe?

Does it work with one and if so what does yours look like?

Its a V1 kit and im told they do differ in design from the V2. So I know the wastegate placement is diiferent. But stading up the radiator and having push fans should equate to a V2 setup

Any pix or ideas lmk

that would be great.

jrpimp00

iTrader: (17)

Probably wont help but i have a v1 kit and added a t4 to t6 transition flange on it and running a s480. It sat just a lil over 1/4" from the radiator and my blanket is touching it. im running a 4" dp but its going to be dumped out the front fender

I dont think a 4 inch dp will fit unless youre running a turbo k member, thats if youre trying to run it out back

a-low

iTrader: (26)

Got any pics?

SPRAYED Z

iTrader: (4)

U mean a bumper exit right?? NOT a fender exit?

If it worked with a t6 then it will work on a t4. The turbos are virtually identical as for placement. Yes I see you being closer to the radiator but bends will make it stray away from the WG and radiator/core support

jrpimp00

iTrader: (17)

LOL, yeah i meant bumper. Will get some pics tomorrow

blackbird0230

a friend is running this hsp v1 kit with a pt88. needed a turbo k member and will add supoort to help hold turbo. He also made the radiator stand vertical to get more room

HolyShiznit

iTrader: (11)

Jon @ Huron Speed told me that a PT88 (T4) will fit on the V1 kit, however the bottom part of the radiator might need to slide slightly forward (where the ac condenser would have been).

I will know in a few days as I am replacing the 7475 on my V1 kit with a PT88.

c0ncEpT

iTrader: (4)

A PT88 will fit Jon's V1 kit. Local guy had one with a bumper exit exhaust. He didn't stand the radiator up either and it still cleared.

He did have to add a 2nd wastegate to really control the boost tho.

Superman09

iTrader: (65)

Yep, PT88 will fit the V1 kit. We installed one and pushed bottom of the radiator forward a little for more clearance but left the top in same location. I cannot comment on =how the V2's 4" down pipe will fit with the V1 kit and a PT88 but I am sure it would be very close as turbo placement is quite similar!

transamfreak01

iTrader: (8)

I'm glad I saw this post bc I was wondering this too. They told me with my 408 to not go with v1 t4. Now I'm interested. More info on this please

Superman09

iTrader: (65)

Our new T4 V2 kit can fit mid frame T4s without having to route the factory radiator or position and includes a 4' bumper exit down pipe as an option for them as well!