RedRocketZ28

iTrader: (19)

I am contemplating selling my triple disc 2b converter. Out of curiosity, what are they asking for the one you are thinking about?

MY_2K_Z

iTrader: (1)

$600 new.

MY_2K_Z

iTrader: (1)

Got a circle d 258mm triple disc 2a

MY_2K_Z

iTrader: (1)

Small update got the boost gauge in the Ac vent done.

Game ova

This is totally random, but when I looked at the pic...and seen your brake pedal....I immediately thought "anti lag". But reality is, it says "anti lock" 😂😂. Yea I know....I'm burned up.

98Camarod

iTrader: (43)

I had my eboost mounted there. It's a good location to see while you're driving.

Stu_x24x

iTrader: (17)

With the manifold and downpipe like that, how is plug and wire access? Do you think they can be changed relatively easily or would you have to pull parts off to get to them?

MY_2K_Z

iTrader: (1)

The car is pretty easy to work on. But I do think the downpipe has to be slid out for plug changes. No big deal though.

stackz

I thought you were keeping ac? Why block a vent with a gauge? Afraid of it overheating? Lol. why not just do an a pillar pod or a column pod if you are trying to be stealthy?

MY_2K_Z

iTrader: (1)

I'm fine losing 1 vent. I'm not trying to be sneaky at all with this car. The turbo is in the headlight so that's pretty obvious. It has the wastegate dumped out the fender and 3ft of 4" exhaust. It's loud and proud man, far from a sleeper.

MY_2K_Z

iTrader: (1)

MY_2K_Z

iTrader: (1)

Was going to get the motor stabbed then I remembered I still need to tap the sides of the block for knock sensors. It's really close to first start up. I need iac,tps, oil pressure and fuel pumps for the 2nd time

MY_2K_Z

iTrader: (1)

Tapped the sides of the block for the knock sensors and got the turbo drain in the pan. Also got the engine and Trans back in the car. The car is very dusty from body work though. I also ordered an ls3 intake that should be here Thursday.

MY_2K_Z

iTrader: (1)

Didn't want to fork over $100 for the lokar flexible dipstick so I made one with some 8an hose I have and the ends of the factory tube.
I coated it with rtv just to make sure it seals but I think it's going to work great.

It's in the car now and took 2 minutes to install instead of fighting the factory tube.

The Cartel

iTrader: (1)

Ha! Good job, simple solutions are usually the best!

MY_2K_Z

iTrader: (1)

Finished up my downpipe today. Made a turndown, welded an o2 bung and the vband.
Sprayed it and wrapped it. It's 4" FYI.


Also picked up some Trans fluid, motor oil, and Trans filter. So I'll get it all topped off tonight.

Game ova

So close, you can probably taste it.

MY_2K_Z

iTrader: (1)

Hell ya I'm pretty excited. The list is getting pretty short and I live in Texas so we don't have winter so I should be able to drive it in the next month or so.

98Camarod

iTrader: (43)

My good friends live just outside of Houston. It'a beautiful area, I wouldn't mind living there once I'm done with the Navy.

What is all that is left?

MY_2K_Z

iTrader: (1)

Ya I live just outside Houston as well. Not much is left. Trans cooler lines, install new fuel pumps and just a bunch of small odds and ends.