Bob@BruteSpeed

iTrader: (16)

F-3X-143

3,300+ HP capable, 13.5" Housing, 143mm Inlet...
With ProCharger racers pushing the limits of the F-3R-136 we knew it was only a matter of time before guys would be chomping on the bit for more power. With cylinder head technology at an all time high, and billet engines upping the power numbers daily, it's an amazing time to be in heads up racingl. The ProCharger F-3X-143 is the perfect supercharger to maximize these platforms for the ultimate power from a single power adder.
Taking key notes from the record smashing F-1X, combined countless hours in the Aerodynamic testing cells, mated to the bullet proof F-3 gearbox with a few tweaks, the F-3X-143 was born.
NAME: F-3X-143
PRICE: TBD
RELEASE: Late 1st Quarter 2016 - See more at: https://www.procharger.com/blog/just....cYu1o0Pw.dpuf
Bob

The Alchemist

iTrader: (19)

With that work on a stock bottom end LS?

I kid....

Bob@BruteSpeed

iTrader: (16)

It might last until you get the part throttle tuning done. Bob

The Alchemist

iTrader: (19)

That thing must weigh close to 100lbs.

Detoxx03

iTrader: (14)

That's a bad boy.

Rise of the Phoenix

iTrader: (27)

The turbo boys have been put on notice.

asubennett

iTrader: (6)

143mm Inlet. The opening to that b*tch is 5.6 inches across. LOL.

Bob@BruteSpeed

iTrader: (16)

It'd make for a good looking blower on the street! Bob

Blown06

iTrader: (32)

I want this on a gear drive hooked to a solid billet Dart LSnext with a set of solid heads from All Pro or solid billets from Frankenstein on methanol. Put it in my ol street truck.

Bob@BruteSpeed

iTrader: (16)

That would be just plain awesome!! Bob

charlie_gonzales

iTrader: (12)

That would be very cool to see in your truck.

scottywheels

Bob that Would have been a nice piece on my billet motor !! But I went to the darkside

Bob@BruteSpeed

iTrader: (16)

Yes indeed, that would Scott! You'll have to send me a pm when you get a chance and let me know how your car ran this year. Thanks. Bob

coltboostin

There is a car with this thing hanging off it at PRI.

Looks tiny.

enigmah

iTrader: (1)

For the low low price of your first born child!!!!

oscs

iTrader: (19)

Right

Bob@BruteSpeed

iTrader: (16)

PRI keeps getting larger each year, great show with great weather this year! Bob

ajrothm

Probably takes 400hp to run the blower at full tilt.... Better have the best crank money can buy....

No doubt, it will make serious jam.