S475 346ci Turbo Bird
#1
TECH Resident
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: STL, Mo
Posts: 954
Likes: 0
Received 0 Likes
on
0 Posts
S475 346ci Turbo Bird
So I guess technically this is my third build thread I've put up on Tech here and this one is a little different.
My first turbo build from when I started six years ago was KYTP kit that i had built since I didn't have much fabrication knowledge or skills. Lets just say I didn't get completely what I paid for and for anybody who was around and knows what went down around then with Kentucky Turbo knows that.
So now six years later on a combo that was never finished and frankly isn't up to par with me was sold. I sold everything off the car (turbo kit wise) to start over fresh. I was originally going to put it back to bolt-ons and sell the car and then later decided since I know what I know now I'm just going to build my own kit.
So here is the start of it.
Forged LS1 (Compstar Rods, Wiseco Pistons)
Stock T56 with RPS twin carbon clutch (No bitch box)
FAST LSX 92mm Intake & Rails
ID1000 Injectors
Squash Performance dual in tanks
Borg S475 T6
Precision 46mm gate
Tial 50mm BOV
Everything else on the kit is custom.
My first turbo build from when I started six years ago was KYTP kit that i had built since I didn't have much fabrication knowledge or skills. Lets just say I didn't get completely what I paid for and for anybody who was around and knows what went down around then with Kentucky Turbo knows that.
So now six years later on a combo that was never finished and frankly isn't up to par with me was sold. I sold everything off the car (turbo kit wise) to start over fresh. I was originally going to put it back to bolt-ons and sell the car and then later decided since I know what I know now I'm just going to build my own kit.
So here is the start of it.
Forged LS1 (Compstar Rods, Wiseco Pistons)
Stock T56 with RPS twin carbon clutch (No bitch box)
FAST LSX 92mm Intake & Rails
ID1000 Injectors
Squash Performance dual in tanks
Borg S475 T6
Precision 46mm gate
Tial 50mm BOV
Everything else on the kit is custom.
Last edited by NBM-LS1; 04-12-2016 at 03:54 PM.
Trending Topics
#12
TECH Resident
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: STL, Mo
Posts: 954
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the complements guys its been a long time coming. Just got my new water pump since the one that's been sitting on car is all crusty on the inside. I figured for as cheap as they are I'll just throw a new one on there.
The header build kit comes from a company called Icengineworks.
The header build kit comes from a company called Icengineworks.
#20
TECH Resident
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: STL, Mo
Posts: 954
Likes: 0
Received 0 Likes
on
0 Posts
Worked on it a little more this weekend. Got the passenger side header and crossover wrapped. I ran out of wrap and will have some more tomorrow. Finished up the new fuel lines as well as started on finish welding some of the charge piping.
Just throwing this in here. It's not for my car. It's a small Water/ice tank for an ZR1 blower swapped c6.
Just throwing this in here. It's not for my car. It's a small Water/ice tank for an ZR1 blower swapped c6.