planned mods for FI, help please!
#1
Staging Lane
Thread Starter
iTrader: (10)
Join Date: Oct 2006
Location: Commerce GA
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
planned mods for FI, help please!
I've read the forced induction stickies, and I know what is said to be needed, but I'm just wondering how this looks. I'm setting up for the procharger route eventually. Once I'm finished I'm looking at the 520RWHP range. How does this Mod list look so far? Do you like, dislike it. What am I missing? I know I'll need a fuel system and injectures, but other than that what am I missing? It's a M6 2000 trans am. Thanks for your help!
· pacesetter coated LT headers-
· pacesetter y-pipe-
· Stage 3 clutch-
· Bmr hardtop tubular low clearance subframe connecters-
· Bmr swaybar complete kit w/all bushings-
· Bmr chrome moly tubular control arms w/ poly bushings-
· Ls6 intake-
· Magnaflow catback (probably w/ a cutout)-
· 25% reduce crank pulley
· 99-tr 224/227-114 LSA w/ single springe valve upgrade–
· 160* thermo-
· ported throttle body-
· descreen MAF-
· ngk tr55’s spark plugs
feel free to tear it apart and help me out, I just want to do this right thanks!
· pacesetter coated LT headers-
· pacesetter y-pipe-
· Stage 3 clutch-
· Bmr hardtop tubular low clearance subframe connecters-
· Bmr swaybar complete kit w/all bushings-
· Bmr chrome moly tubular control arms w/ poly bushings-
· Ls6 intake-
· Magnaflow catback (probably w/ a cutout)-
· 25% reduce crank pulley
· 99-tr 224/227-114 LSA w/ single springe valve upgrade–
· 160* thermo-
· ported throttle body-
· descreen MAF-
· ngk tr55’s spark plugs
feel free to tear it apart and help me out, I just want to do this right thanks!
#4
7 Second Club
iTrader: (42)
Join Date: Jun 2004
Location: paducah, ky
Posts: 4,558
Likes: 0
Received 0 Likes
on
0 Posts
you need a ATI damper not just a under drive pulley....
ATI has one thats 10% under driven which is plenty... dont waste money on a ASP or March under drive pulley... get the ATI one as it will allow you to easily bolt on the Blower pulley and you can key it.
ATI has one thats 10% under driven which is plenty... dont waste money on a ASP or March under drive pulley... get the ATI one as it will allow you to easily bolt on the Blower pulley and you can key it.
#7
7 Second Club
iTrader: (42)
Join Date: Jun 2004
Location: paducah, ky
Posts: 4,558
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Creman
can someone give me a link to a good example of an ATI damper or a similar product and explain the advantages to me?