Picked up 75rwhp by removing intake, help.
#1
TECH Enthusiast
Thread Starter
Join Date: Dec 2005
Location: Scottsdale, AZ
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Picked up 75rwhp by removing intake, help.
Took the car to the dyno finally and tried to see what this little D1 could do when pushed on a 402. I have an 8.5" crank running the D1 on a 3.9" pulley on a C5 for reference sake.
We slap her on the rollers and even though it's already 97deg outside at 9am we're hoping for some good numbers.
First run puts down less than I did in the winter on 91 octane!! WTF? I ask my tuner what's up and he says boost got to 10#s then fell to 9#s. I had talked to Bob and he thought my intake might be holding things up so I yanked it off and gained 75rwhp!
So since I can't drive with it off what do I do? Anyone think a blackwing filter would fit directly on the D1 inlet?
Graph comparing the 2 runs.
We slap her on the rollers and even though it's already 97deg outside at 9am we're hoping for some good numbers.
First run puts down less than I did in the winter on 91 octane!! WTF? I ask my tuner what's up and he says boost got to 10#s then fell to 9#s. I had talked to Bob and he thought my intake might be holding things up so I yanked it off and gained 75rwhp!
So since I can't drive with it off what do I do? Anyone think a blackwing filter would fit directly on the D1 inlet?
Graph comparing the 2 runs.
#6
TECH Enthusiast
Thread Starter
Join Date: Dec 2005
Location: Scottsdale, AZ
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LASTLS1
What brand of air filter? If you have a pos k&n that is dirty that could be your problem, those filters are JUNK when they get dirty! Can you run a large paper filter?
looks like this, but I have the 8 rib setup. This is just to see the intake design.
Trending Topics
#9
TECH Enthusiast
Thread Starter
Join Date: Dec 2005
Location: Scottsdale, AZ
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kp
Thats a big jump, did you make any other pulls with and without to verify?
Biggest air filter you can fit will work the best, that inlet doesnt look that horrible.
Biggest air filter you can fit will work the best, that inlet doesnt look that horrible.
I think I'll see if the blackwing filter can fit on the blower inlet and get rid of the other piping and see what happens.
Without the filter setup we picked up 2psi as well which contributed to the increase in power of course.
#10
8 Second Club
iTrader: (34)
I pick up quite a bit on the dyno without the filter/hat as well but oddly enough the car runs no better at the track. I've had it on and off a dozen times, trust me if it would make the car run a couple hundredths faster it would be off the car
Its just weird because that C5 one looks a ton better then the F-body one. You should have tried with and without the filter only for grins. 750rw with a D1 is making some good power though. Thanks for posting up the pulley combo also, most people dont do that for some odd reason..
Its just weird because that C5 one looks a ton better then the F-body one. You should have tried with and without the filter only for grins. 750rw with a D1 is making some good power though. Thanks for posting up the pulley combo also, most people dont do that for some odd reason..
#11
TECH Enthusiast
Thread Starter
Join Date: Dec 2005
Location: Scottsdale, AZ
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kp
I pick up quite a bit on the dyno without the filter/hat as well but oddly enough the car runs no better at the track. I've had it on and off a dozen times, trust me if it would make the car run a couple hundredths faster it would be off the car
Its just weird because that C5 one looks a ton better then the F-body one. You should have tried with and without the filter only for grins. 750rw with a D1 is making some good power though. Thanks for posting up the pulley combo also, most people dont do that for some odd reason..
Its just weird because that C5 one looks a ton better then the F-body one. You should have tried with and without the filter only for grins. 750rw with a D1 is making some good power though. Thanks for posting up the pulley combo also, most people dont do that for some odd reason..
I'll post my results as I change things around for the forum. What's the most people make on a D1 by chance?
#13
TECH Enthusiast
Thread Starter
Join Date: Dec 2005
Location: Scottsdale, AZ
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ChevyChad
The intake track doesn't really look all that bad- especially compared to the f-body 'hat'. My hat and filter restricted my P1SC setup 90 RWHP and 3 psi!