9" install and stock panhard rod
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Mar 2002
Location: Wyandotte, MI
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
9" install and stock panhard rod
I'll be doing a 9" install very soon. It's a Moser housing.
I have been reading a bit and I have the swaybar relocation brackets coming via ups.
Someone mentioned that the stock panhard rod wouldn't work due to clearance issues. Will I need a new panhard rod?
I have been reading a bit and I have the swaybar relocation brackets coming via ups.
Someone mentioned that the stock panhard rod wouldn't work due to clearance issues. Will I need a new panhard rod?
#6
TECH Enthusiast
iTrader: (2)
Join Date: Oct 2002
Location: Montreal (CANADA)
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
everything fit on my 9"... I also have the Moser housing and only thing missing was the swaybar brackets (fabbed some)... but all fits.
Yet, my center section is a Strange with a high-biased gear-driven diff.
Yet, my center section is a Strange with a high-biased gear-driven diff.