Gears & Axles Driveshafts | Rearends | Differentials | Gears | 12 Bolt | 9 Inch | Dana

4.10 gears 7.5 10 bolt

Thread Tools
 
Search this Thread
 
Old 05-01-2014, 05:47 PM
  #1  
Staging Lane
Thread Starter
 
fordkilla2000's Avatar
 
Join Date: Feb 2014
Location: Seguin Texas
Posts: 92
Likes: 0
Received 0 Likes on 0 Posts
Default 4.10 gears 7.5 10 bolt

Anyone have 4.10 in their rear? What is the rpm at 70 in OD?
Old 05-01-2014, 06:28 PM
  #2  
TECH Veteran
iTrader: (4)
 
FirstYrLS1Z's Avatar
 
Join Date: Aug 2004
Location: Euclid,Ohio
Posts: 4,155
Received 129 Likes on 114 Posts

Default

A4 or M6 ?????
Old 05-01-2014, 06:45 PM
  #3  
Staging Lane
Thread Starter
 
fordkilla2000's Avatar
 
Join Date: Feb 2014
Location: Seguin Texas
Posts: 92
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by FirstYrLS1Z
A4 or M6 ?????
A4 trans
Old 05-01-2014, 08:12 PM
  #4  
TECH Veteran
iTrader: (4)
 
FirstYrLS1Z's Avatar
 
Join Date: Aug 2004
Location: Euclid,Ohio
Posts: 4,155
Received 129 Likes on 114 Posts

Default

A4 in 4th gear with convertor locked at 70mph is a true 2650rpm. the factory dash tach typically indicates 150-200rpm above true rpm,so adding that you would see 2800-2850rpm off the dash factory tach.
Old 05-02-2014, 11:31 AM
  #5  
Staging Lane
Thread Starter
 
fordkilla2000's Avatar
 
Join Date: Feb 2014
Location: Seguin Texas
Posts: 92
Likes: 0
Received 0 Likes on 0 Posts
Default

That's crazy and maybe a bit higher than I wish. Right now with the 2.73 gears I'm at 1800 rpm at 70mph
Old 05-02-2014, 11:32 AM
  #6  
Staging Lane
Thread Starter
 
fordkilla2000's Avatar
 
Join Date: Feb 2014
Location: Seguin Texas
Posts: 92
Likes: 0
Received 0 Likes on 0 Posts
Default

Maybe I need to get my IC calibrated
Old 05-02-2014, 12:04 PM
  #7  
TECH Veteran
iTrader: (4)
 
FirstYrLS1Z's Avatar
 
Join Date: Aug 2004
Location: Euclid,Ohio
Posts: 4,155
Received 129 Likes on 114 Posts

Default

I ran 4.56s' for 4 years in my A4,a very wicked 1st and 2nd gear. True rpm was 3000 at 72 mph. Even took 4 trips to Florida from Ohio with the 4.56s'. The computer handled mpg well. 24.5mpg at freeway legal speeds with the OEM 3.23s',21.5mpg with the 4.56s'. RPMs don't bother me. If you consider 1000rpm as the low end of the operating range and 6000rpm as the upper range,3500rpm is the middle of the designed range. One time coming back on I26 across S.C.,hooked up with a fast moving group of cars and was in cruise control at 4000rpm for about an hour.
Old 05-02-2014, 12:06 PM
  #8  
TECH Fanatic
iTrader: (1)
 
1 FMF's Avatar
 
Join Date: Mar 2002
Location: CT
Posts: 1,861
Likes: 0
Received 2 Likes on 2 Posts

Default

www.f-body.org/gears



Quick Reply: 4.10 gears 7.5 10 bolt



All times are GMT -5. The time now is 01:46 PM.